Research of ANFO cylindrical explosive charge detonation in air using modern numerical modeling methods
Journal Title: CHEMIK nauka-technika-rynek - Year 2014, Vol 68, Issue 1
Abstract
This paper presents the results of saletrole cylindrical explosive charge detonation in the air, using Ansys LS-Dyna program. Results of numerical analyzes were referenced to the actual effects of detonation in proving ground researches. Simulation and experimental researches were performed for cylindrical charges having a diameter 45 mm and length 250 mm. Additionally the measurements of the blast wave intensity were conducted by using Held’s Method, and measurements of the blast wave overpressure in three characteristic directions relative to the charge are also discussed.
Authors and Affiliations
Andrzej Maranda, Piotr Koślik, Justyna Hadzik, Zenon Wilk
Identification and assessment of the environmental aspects according to the ISO 14001 standard
This article presents principles of identification and assessment of the environmental aspects required by the Environmental Management System based on the ISO 14001 standard. The course of preparing the procedure of ide...
Współczesne metody oczyszczania fenolowych ścieków koksowniczych
Określono źródła, ilości i skład fenolowych ścieków koksowniczych powstających w procesie koksowania węgla i uzyskiwania węglopochodnych. Wykonano analizę współczesnych metod oczyszczania ścieków koksowniczych. Oceniono...
Potentiometric, ESI-MS and NMR combined studies on the magnesium(II) and calcium(II) complexation by selected bisphosphonic acids in aqueous solution
Solution equilibrium studies on the Mg(II)/Ca(II)L systems (L= (cyclohexyl)aminomethane-1,1-diphosphonic acid (1), azepan- 1-yl-methane-1,1-diphosphonic acid (2), azecan-1-yl-methane- 1,1-diphosphonic acid (3) have b...
Zastosowanie teorii funkcjonałów gęstości do modelowania właściwości elektronowych skorpionianowych kompleksów oksodimolibdenowych
W artykule, na przykładzie skorpionianowych kompleksów oksodimolibdenowych o mieszanej walencyjności, przedstawiono zastosowanie modelowania DFT do określenia i interpretacji fizycznej wpływu wzajemnej orientacji grup [M...
Procesy granulacji w Azotach Tarnów, granulacja mechaniczna SALETROSANU
Przedstawiono granulację mechaniczną nawozów – podstawową technologię w modernizacji i rozwoju produkcji nawozów w Azotach Tarnów. Omówiono drogę dojścia do wyboru i sposób przygotowania inwestycji granulacji mechaniczne...