Research of the induction-dynamic mechanism operation characteristics
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2018, Vol 32, Issue 1308
Abstract
The design of the linear-drive induction-dynamic mechanism used in high-speed breakers is presented. The research mechanism consists of a coil with leads and a moving disk. The coil of the mechanism is wound with copper tape, the disk is made of copper bus and mounted on the rod, which passes through the hole of the coil. A circuit diagram of a laboratory test bench for the study of the induction-dynamic mechanism has been developed and the principle of operation of the circuit has been considered. A description of the electrical circuit elements is given. A prototype model of the induction-dynamic mechanism was manufactured and a mobile laboratory stand was assembled with the necessary devices mounted on a DIN-rail and ancillary accessories. The high speed of the induction-dynamic mechanism is ensured by the presence of a storage capacitor, which discharges the stored energy to the mechanism coil in a relatively short time. Auxiliary parts for mounting the elements of the stand are made using a modern 3D printer FLASHFORGE CREATOR PRO. Oscillograms of transients are obtained when an induction-dynamic mechanism is triggered, namely: oscillograms of current in the mechanism winding and of voltage on a storage capacitor as well as oscillogram of moving disk displacement. The laboratory stand is used in the educational process as a component of the laboratory workshop on the discipline "Electrical Apparatus"
Authors and Affiliations
V. V. Lytvynenko
Keywords
Related Articles
- EP ID EP494210
- DOI 10.20998/2079-3944.2018.32.07
- Views 106
- Downloads 0
Efficiency of use of various types of ferromagnets in linear pulse electromechanical converters of induction and electromagnetic types
Purpose. The aim of the article is to estimate the influence of the type of ferromagnet - magnetodielectric, ideal and real steel, on the power, speed and electrical parameters of the linear pulsed electromechanical conv...
Influence of the vacuum switch contact system heating temperature on static mechanical stresses in the vacuum bellow material
The article considers the influence of the heating temperature of the contact sys-tem on the internal stresses in the bellows vacuum switch finite element method. Semi-Chen dependence of mechanical stresses in the materi...
Automation of the research multicooker
The multicooker design, structure and purpose of its main parts, the electrical circuit and the control system which includes sensor elements (sensors of pressure and temperature) are considered. The control unit in it i...
Simulation of control axial flux permanent magnet generator
This article gives analysis and comparison of control system and stabilization external characteristic of axial flux generator. A technical solution is proposed that allow to control and stabilize external characteristic...
Modeling of uniform static magnetic distribution near steel column
The article deals with the methods for describing the distortion of homogeneous static magnetic field induced by homogeneous isotropic magnet spheroid. The obtained analytical expressions describe the distribution of the...