Research on Construction Error Simulation of Rigid Catenary for 160 km/h Urban Rail Transit
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective As construction error of the rigid catenary at 160km /h train speed affects the dynamic performance of the pantograph catenary, the technical parameters that meet the condition for the pantograph and rigid catenary system at 160 km/h are designed based on the on-site measurement data and the simulation analysis of rigid pantograph catenary system. Method Firstly, the guiding height (vertical distance from catenary to rail surface) parameters of Guangzhou Metro Sanbei Line are measured, and the probability distribution of guiding height is analyzed. It is concluded that the guiding height distribution is basically consistent with the static height distribution of the fixed points, both following the normal distribution. Then, in consideration of the construction error of the guiding height, the DSA250 pantograph is selected and the dynamic simulation model of the pantograph is established according to TB/T 3271. Finally, the dynamic performance of the pantograph catenary under different construction errors is simulated and analyzed, and the technical parameters of the pantograph catenary system meeting 160 km/h requirements are designed. Result & Conclusion The construction error of rigid suspension device guiding height follows the probability distribution model of normal distribution. The standard deviation of the contact force with construction error is 2 to 3 times that without construction error, indicating that the construction error of the guiding height has significant influence on the dynamic coupling performance of the pantograph catenary. For the construction error of rigid suspension device guiding height, the height of 6 fixed points at the anchor segment joints strictly follows the normal distribution with the mean being the nominal height of the overhead line and the standard deviation being 2 mm, and the height of other fixed points strictly follows the normal distribution with the mean being the nominal height of the overhead line and the standard deviation being 3 mm.
Authors and Affiliations
Jinxin QIAO, Jinfa GUAN, Junying CHENG, Cheng LUO, Fan FENG
Keywords
Related Articles
- EP ID EP737764
- DOI 10.16037/j.1007-869x.2024.06.035
- Views 38
- Downloads 0
Influence Analysis of Super-large Diameter Steel Pipe Pile Resonance-free Method Construction on Surrounding Soil Deformation
Objective The high-frequency resonance-free method is renowned for its high efficiency and low environmental impact. To further investigate the influence of constructing super-large diameter steel pipe pile with this met...
Interoperation Plan for City Railway CBTC and CTCS-2
Objective The research is specially carried out aiming to meet the operational requirements for interoperability between city railway CBTC (communication-based train control) and railway CTCS-2 (China train control syste...
Construction Technology for Shield Tunnelling Under-passing in Proximity to Operation Metro Tunnels in Water-rich Pebble Stratum
Objective In the process of shield construction under-passing the existing metro line in water-rich pebble stratum, irregular settlement of the overlying soil mass beyond control range may occur, potentially leading to i...
Experimental Study of Rail Beam Joint Bolt Loosening Impact on Rail Structure Vibration in High-Speed Maglev Maintenance Base
Objective During the train debugging process, significant vibrations may occur in the steel rail beams of high-speed maglev maintenance bases due to their unique structural characteristics, potentially leading to bolt lo...
Interlocking Scheme for Inspection Operations in FAO Vehicle Base
Objective Unlike traditional signal control ownership with manual operation vehicle bases, under FAO (fully automatic operation) conditions, signal control for unmanned zones in the vehicle base during vehicle entry is e...