Research on the effect of elevated temperature on the resistance to bending spruce wood impregnated with silica containing fire retardant
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 97, Issue
Abstract
Research on the effect of elevated temperature on the resistance to bending spruce wood impregnated with silica containing fire retardant. The paper presents results of the study on the effect of high temperature on the resistance to bending spruce wood impregnated with aqueous solution containing SiO2 nanoparticles at a concentration of 400 ppm. Impregnation was carried out with the vacuum method of vacuum pressure of 0.07 MPa. Based on the results of the studies, it should be noted that impregnation with aqueous solution containing SiO2 nanoparticles adversely affects the spruce wood resistance to bending both at room temperature and after initial exposure at 230 °C. The results of the tests conducted at 230° C show that impregnation has unfavourable effect on sampling stiffness. There is an increase in the statistical coefficient of variation in elevated temperature conditions.
Authors and Affiliations
PAWEŁ OGRODNIK, Waldemar Jaskółowski
Keywords
Related Articles
- EP ID EP333511
- DOI -
- Views 88
- Downloads 0
Вычисление изменения температуры воздуха во фризере во время замораживания тополиных кряжей
Equations for the computation of the experimentally determined change in the processing air medium temperature Tm in freezer during freezing of logs have been suggested. The decreasing of Tm during the freezing of the lo...
Changes of functional properties of materials used in wood industryafter ion implantation process
Changes of functional properties of materials used in wood industry after ion implantation process. The paper presents an information about real and potential application of ion implantation method in wood industry as re...
The Influence of Traditional Wood Finishing Substances on Surface Roughness
The Influence of Traditional Wood Finishing Substances on Surface Roughness. The purpose of the project was to assess the traditional substances used for finishing wooden parquets and their influence on surface roughness...
Cutting power estimation of the bandsawing process of beech wood (Fagus sylvatica L.) dried in three operating modes
Cutting power estimation of the bandsawing process of beech wood (Fagus sylvatica L.) dried in three operating modes. In this paper the predicted values of cutting power for bandsawing machine (ST100R, f. Stenner), which...
Influence of impregnation time on the degree of wood-based materials fire protection
The aim of the work was the determination of fire protection degree of wood-based materials (OSB, plywood), impregnated with a model fire retardant depending on the time the saturation. Was used 15% solution of fire reta...