Research on the Influence of Thermoinsulating Cores on the Functioning of Feeders (II)
Journal Title: RECENT - Year 2010, Vol 11, Issue 30
Abstract
The paper presents the results of a study on the influence of heat insulation of feeders on the solidification of castings in silica sand moulds. The study was conducted by computer simulation of casting. The study concerned the influence of feeder thickness and heat insulation on the solidification of the casting-feeder system. Further observation focused on the influence of the thermoinsulating cores applied to feeders on the directing of the casting-feeder system solidification and on feeder efficiency.
Authors and Affiliations
Vasile JIMAN, Ioan CIOBANU, Ciprian SZABO, Daniel FERARU
Keywords
Related Articles
- EP ID EP97111
- DOI -
- Views 69
- Downloads 0
Gap Determination for Clinker Preparation Kilns
Cement kilns are the heart of the cement production process; they are used for the pyroprocessing stage of manufacture of Portland and other types of hydraulic cement. Their capacities usually define the capacity of the...
Comparison between Casting Solidification Simulation in Cylindrical Coordinates and in Cartesian Coordinates
Two software modules for solidification simulating of eutectic alloy castings were done at Transylvania University of Brasov. The first of them 3D-SIM EUT is based on finite difference mathematical model in Cartesian coo...
The Dynamic Evolution Modeling of the Bearings State Change
Predictive maintenance is used to improve the availability of industrial bodies while minimizing maintenance costs. Monitoring the evolution of defects and early detection are based on periodic controls to avoid failures...
Influence of Adhesive Bonded Surface Texture on Adhesive Bonding Process
Laboratory experiments deal with an influence of a grit-blasting by means of corundum grits AL2O3 of different sizes on a surface roughness of steel substrates prepared according to the standard CSN EN 1465. The experime...
Studies Concerning the Possibility of Hardening through Thermic Isothermal Treatment of the Casting Alloys of Aluminium
The studies undertaken have the objective of proving the property of a hardening aluminum alloys through warm oil-quenching. Maintaining in the stair of the temperature intermediary between one of heating and one environ...