Research on the new CFRP prestressing system for strengthening of RC structures
Journal Title: Architecture Civil Engineering Environment - Year 2017, Vol 0, Issue 0
Abstract
The paper presents a research on the new Polish CFRP prestressing system for strengthening of reinforced concrete struc- tures. The system is called Neoxe Prestressing System II (NPS II). NPS II consists of two main elements: a special steel anchorages mounted on both ends of a single CFRP strip and a tensioning device. The anchorage is made of two steel plates. CFRP strip end is fixed between steel plates through bonding by epoxy resin and gripping by bolts. The tensioning device compatible with anchorages can generate maximum prestressing force of 170 kN. The research on NPS II comprised a series of static and fatigue tests on anchorages themselves, system mounted on strengthened beams as well as on-site, i.e. on actu- al RC bridge. The system has been examined, its efficiency has been confirmed in laboratory and in field tests and now it is ready to use in strengthening purposes.
Authors and Affiliations
B. Piątek, T. Siwowski
Indoor environment quality evaluation in dwellings: a Polish case study
The indoor environment determines the occupants’ comfort and significantly affects the energy consumed for heating and ventilating the building premises. Therefore, the proper complex thermal diagnostics of existing buil...
Innovative steel fibers and their effect on fiber distribution in beams - experimental investigations
This contribution presents experimental investigations on fiber reinforced concrete (FRC). A new type of straight steel fibers (company Feel Fiber) with a length of 60 mm was used. 12 beams with a length of 6 m, a height...
Acoustic evaluation of a new modular system for green roofs and green walls
Environmental noise is a major problem that affects citizen’s health and comfort mainly in densely populated urban areas. There are some ways to reduce environmental noise pollution through the use of materials with good...
On-site thermal diagnostics of heating and DHW installations
The requirements for the inspection of heating systems have been introduced in the Energy Performance Act. Thermal diagnostics of the system is an evaluation of the technical conditions of the heating and hot water insta...
Thaumasite non-sulphate attack at ambient temperature and pressure
One of the products of concrete sulphate corrosion, besides gypsum and ettringite, is thaumasite. The thaumasite is a very dangerous, non binding crystalline phase, which is forming at the expense of C-S-H phase. There w...