Research on Time Synchronization of Train Communication Based on Time-sensitive Networking
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 5
Abstract
Objective The millisecond-level precision of NTP (network time protocol) in train communication networks has increasingly failed to meet the requirements of high traffic and deterministic transmission. Meanwhile, existing research is limited to applying the PTP (precision time protocol) to train communication scenarios, lacking research on time synchronization in time-sensitive networks within train communication networks. Therefore, it is necessary to conduct relevant analysis. Method Firstly, based on the current research status of time synchronization in train communication networks, the deviation and delay in train communication networks are analyzed according to time-sensitive network synchronization protocols. Secondly, redundancy mechanis for clock service source failures and jumps are proposed. Finally, the effectiveness of the redundancy mechanism is verified through simulation of the time synchronization process. Result & Conclusion Time-sensitive networks are well suited for time synchronization of clock service sources in train communication networks, and their redundancy mechanisms effectively mitigate synchronization errors caused by clock service source failures and jumps.
Authors and Affiliations
Junxian ZHANG, Rujun LIANG, Tao HUANG, Wenyi ZHANG, Long XU, Wei XIONG, Hailong ZHU, Kailai PENG
Keywords
Related Articles
- EP ID EP735614
- DOI 10.16037/j.1007-869x.2024.05.011
- Views 31
- Downloads 0
Span-height Aspect Ratio of Pre-stressed Reinforced Concrete Track Beams for Straddle Monorail with 1 250 mm Gauge and 25 m Span
[Objective] To adapt to the building characteristics of a new-model straddle monorail train, mechanical performance analysis and interface optimization research are conducted on a new type of PRCTB (pre-stressed reinforc...
Acoustic Characteristics Analysis of Rail Transit Vehicle Bogie Axle Box Bearing Faults
Objective To address the challenge of difficult fault identification in rail transit vehicle bogie axle box bearings under rail service conditions, it is necessary to investigate the acoustic characteristics of these fau...
Numerical Study on Shape Discrimination of Land Subsidence Groove during Double-line Shield Construction
Objective The shape of the land subsidence grooves during double-line shield construction varies with the clear distance and buried depth of the tunnel. Thus, it is necessary to conduct an in-depth study on the evolution...
TCMS-based Dual-bus Grid-connected Power Supply Control Technology Scheme for Metro Train Auxiliary Power Supply System
Objective In the current mainstream of train auxiliary power supply systems, such as cross-supply method and extended supply method, the failure of a single SIV (auxiliary inverter) can impact the normal operation of ele...
Research on the Impact of Wheel Polygonalization on Metro Bogies
Objective The objective is to investigate the impact of wheel polygonalization on metro bogies, thereby strengthening the control requirements for wheel polygonalization, and enhancing the operational quality and safety...