Resilience and Deformability of Fused Textile Systems
Journal Title: Fibres and Textiles in Eastern Europe - Year 2015, Vol 23, Issue 4
Abstract
The aim of this research was to investigate the resilience properties of textile systems fused with different interlinings by applying the method of pendulum impact loading. For the investigations, four worsted outer fabrics and four interlinings were chosen. For testing, a pendulum impact device was used, the operation of which is based on cyclical strikes of the spherical indentor upon the specimen, taking into account the resilience and deformability of the material. It was defined that resilience properties could be characterised not only by the values of impact bn and angles rebound αn but also by the duration of vibration periods Tn. It was defined that the decay of pendulum impact bn and rebound angles αn in the period of t = 20 s can be described by power function y = a + bxc with a high accuracy (R2 = 0.995 - 0.999). For the rebound process, better resilience of fabrics and their fused systems is characterized by higher values of power function coefficients a and b and lower values of its coefficient c. For the impact process, lower deformability of the samples tested is characterised by lower values of power function coefficients a and b, but with a more intensive decrease in deformability – by higher values of coefficient c. The degree of the fused system’s deformability directly depends upon the thickness and mass per unit area of the interlinings used, i.e. less deformable and more stable systems were obtained with thicker interlinings, the mass per unit area of which was higher.
Authors and Affiliations
Kristina Ancutiene, Eugenija Strazdiene, Loreta Krusinskiene
Keywords
Related Articles
- EP ID EP68999
- DOI -
- Views 82
- Downloads 0
Mechanical Characterisation of Carbon Fibre-Reinforced Plastics with Defined Defects
A steadily increasing application of fibre-reinforced plastics in the field of lightweight construction has been observed in the course of the past two decades. Currently a major challenge in the growing high technology...
Opracowanie metody tkania dla wytworzenia przestrzennych dwuwarstwowych innowacyjnych struktur lnianych tkanin
W artykule opisano wprowadzenie i wyczerpującą analizę dwóch metod tkania przeznaczonych dla tkania lnianych tkanin o innowacyjnej strukturze przy zastosowaniu nowoczesnych skomputeryzowanych krosien różnego typu. Przewi...
Embedded Electronic Jacquard Guide Bar: A New Approach to Warp Knitting Using the Machine Jacquard Control System
A fluorine-containing acrylate copolymer emulsion was prepared in this study, which was The jacquard control system is one of the crucial parts of a warp knitting machine. In this paper, we present a new jacquard control...
Badanie powierzchni tkanin typu denim za pomocą analizy obrazu w czasie rzeczywistym
Mimo stosowania współczesnych technologii tkackich, wiele typów defektów tkaniny powstaje podczas ich produkcji. Większość defektów podczas procesu produkcji tkaniny w dalszym ciągu jest wykrywana poprzez kontrolę pracow...
Research on the Compact-Siro Spun Yarn Structure
Compact-Siro spinning technology is one of the most widely used spinning methods. It is conducted on a compact ring frame by simultaneously feeding two rovings into the drafting zone at a predetermined separation. In fac...