RESOURCE INDICATORS MANAGEMENT OF MODERN TECHNICS STRUCTURAL ELEMENTS THROUGH THE APPLICATION OF ENERGYSAVING TECHNOLOGIES OF SURFACE MODIFICATION
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 74, Issue
Abstract
The paper studied the microhardness, structure, phase composition and durability of structural elements of modern technics (for example, steel 20X13) strengthened by a pulsed gasthermocyclic ionic nitriding. In strengthened surface layers there were determined the growth of micro-hardness up to 950 HV on the surface and the presence of two zones: nitride zone and the zone of internal nitriding. The depth of nitride zone is 6 ... 10 m, the total depth of the diffusion layer - 200…285 microns. It was set that due to the effect of the ionic nitriding processing on the strengthened surface layers properties occurs an increase of the average technical resource of machined parts by a factor 2,4. It is concluded that the use of the obtained results in practice when restoring and strengthening the surfaces of modern technics steel details gives the potential opportunities to increase durability while simultaneously significantly reduced repair costs.
Authors and Affiliations
O. V. RADKO
Keywords
Related Articles
- EP ID EP322249
- DOI -
- Views 40
- Downloads 0
DEFLECTED MODE OF CUTTING TOOLS WITH DISCRETE COATINGS
The results of the numerical calculations of the stress-strain state of the cutting edge tool without coating, with continuous and discrete coatings. We consider the problem of determining the temperature field and analy...
ENERGY LEVELS OF CONTACTS IN THE FRICTIONAL INTERACTION OF METAL-POLYMER AND SEMICONDUCTOR MATERIALS
The materials of the article show the types of contacts of microprotrusions of metal-polymer and semiconductor materials. The latter are modified in the form of tablets into the working surface of the polymer linings. En...
INVESTIGATION OF THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF DISCRETE-TEXTURED OIL-BASED SURFACES FORMATION ON THE TRIBOSYS-TEMS FRETTING RESISTANCE
A study was carried out to determine the effectiveness of increasing the fretting resistance of tribosystems by the formation of discrete-textured oil-based surfaces in the form of regularly located microcavities. Phenom...
METHODS OF ESTIMATION OF THERMAL CHARACTERISTICS OF METALLIC FRICTION ELEMENTS OF BRAKE DEVICES
The peculiarities of determining thermal characteristics of metallic friction elements of brake devices are illustrated. The method of regular mode for estimation the rates of heating and cooling the rims of metallic fr...
THE REDUCING OF ENERGYLOADING OF FRICTION UNITS OF BAND-BLOCK BRAKES OF DRAW-WORKS
To increase the heat transfer coefficient from metallic and non-metallic elements of the friction of band-block brakes we can use a developed heat exchange surface. However, the natural cooling of the friction pairs of b...