Results comparison of microwave lowpass filters three- and one-dimensional modeling
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2017, Vol 0, Issue 70
Abstract
In the research and design of microwave devices it is a standard three-dimensional electromagnetic modeling. Three-dimensional modeling greatly enhances the possibilities, but due to the complexity of the model, the connection between construction and its characteristics is largely implicit. As the result the synthesis of construction based on the visibility of the said connection is complicated or even becomes impossible. In this paper it is examined the using of simple one-dimensional model for microstrip lowpass filters by comparing the results of three- and one- dimensional modeling. The results of three- and one-dimensional modeling of the lowpass filters based on traditional microstrip technology and microstrip three-dimensional electromagnetocrystalline inhomogeneities are compared. Two designs of filters are examined: filters based on high and low impedance sections of microstrip line and with capacitive stub. One-dimensional model is a heterogeneous transmission line with equivalent parameters. One-dimensional model allows obtaining analytical expressions for the transmission characteristics of such filters. Three-dimensional modeling is performed in the program package CST Microwave Studio. Calculated transmission characteristics are presented. Features of stubs characteristics are analyzed. The proposed one-dimensional model can be used as a model of the first approximation. One-dimensional model allows separate filter elements (even such complicated as three-dimensional electromagnetocrystalline) characterized by equivalent wave impedance and relative dielectric constant. It is interesting to investigate the possibility of one-dimensional model using for filters with other transmission characteristics.
Authors and Affiliations
Ya. Zinher, Yu. Adamenko, V. Adamenko, E. Nelin
Keywords
Related Articles
- EP ID EP308209
- DOI 10.20535/RADAP.2017.70.56-61
- Views 100
- Downloads 0
Radio technical characteristics of loop plasma antennas
Influence of mercury vapors in the frequency range 50-500 MHz on the specific conductivity (SC) of cold plasma of gas discharge by the loopback asymmetrical PA is probed. It is shown that in the injection of mercury vapo...
Implementation Features of Effective Optical Transport Networks
The purpose of this article is to analyze the features and formulate practical recommendations for the construction of efficient optical transport networks. To sum up the main area of application of CWDM - optical transp...
Improvement of еру incide parameters of electrically small wire antennas
The results of studying ways to improve the VSWR and efficiency ofelectrically small antennas with dimensions much less resonance with matching inductiveloads that are included directly in the radiating antenna wire schy...
Solving the Electrical Impedance Tomography (EIT) inverse problem by the conductivity and back projection methods
In this paper comparing analysis of back projection method and finite element method for imagine projection reconstruction in EIT (voltages measured on electrodes, attached around the phantom – suitable transfer resistan...
Using of the machine learning methods to identify bronchopulmonary system diseases with the use of lung sounds
This study reviews the main approaches to the analyzing of modern methods of digital processing of lung sounds. It is shown that each of the existing methods gives a definite result in solving a particular problem. Howev...