Results of research into efficiency of a flat solar air heliocollector with a wavy absorbing surface
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 8
Abstract
<p>A new design of the air collector with the airtight and warmed casing and the absorber with the wavy surface that can be used as an additional heating element of the low-temperature heat source was developed. We established a series of generalizing dependences for finding thermal effectiveness of the collector, specifically, the influence of the components of thermal balance of the collector on the drop of temperatures in the heat carrier flow in the collector and the insolation level on heating efficiency.</p><p>We obtained analytical dependences for determining the components of thermal balance of the collector, distribution of the temperature field along the absorbing panel, which made it possible to improve the mathematical model of the heat exchange process in the developed air collector. The results of the research into the air collector allowed developing the program of numerical computer calculation of the temperature field of thermal flows.</p><p>It was established that application of the wavy absorbing surface of the absorber in the air heliocollector at the low level of insolation E=377 W/m<sup>2</sup> allows increasing efficiency up to η=58.3 %, and at high energy lighting of E=1,000 W/m<sup>2</sup>, up to η=63.9 %. Performance of the collector was determined by the iterative calculation-quantitative method and made up more than 78–80 %. This is 10–20 % higher than that in flat collectors, and by 5–10 % higher than in cylindrical vacuumed collectors.</p>The obtained results can be used in the development and improvement of the technical facilities of fruit drying, for increasing the technological and energy effectiveness of the process
Authors and Affiliations
Vitaliy Boyarchuk, Sergiy Korobka, Mykhailo Babych, Roman Krygul
Keywords
Related Articles
- EP ID EP666213
- DOI 10.15587/1729-4061.2019.154550
- Views 49
- Downloads 0
Research of a microwave radiometer for monitoring of internal temperature of biological tissues
<p>Currently, there is growing interest among specialists in the use of non-invasive dose-free technologies for diagnosis and monitoring treatment of various diseases. Microwave radiometry enables non-invasive detection...
Modeling of the process of the shot based on the numerical solution of the equations of internal ballistics
<p>The study of the process of firing a firearm, taking into account the degree of wear of the barrel, requires an assessment of the losses of powder gases due to their breakthrough between the barrel walls and the proje...
Determining the rational modes for low-temperature storage and for obtaining products of Japanese Quince processing with high consumer properties
<p>The article reports a comprehensive study into the rational modes for low- temperature storage and for obtaining the products of Japanese Quince processing with high consumer indicators by examining the kinetics of fr...
Synthesis of a fractional-order PIλDμ-controller for a closed system of switched reluctance motor control
<p>The relevance of creating high-quality control systems for electric drives with a switched reluctance motor (SRM) was substantiated. Using methods of mathematical modeling, transient characteristics of the process of...
The role of fatty acid structure in various pure vegetable oils on flame characteristics and stability behavior for industrial furnace
<p>This study investigates the effects of the fatty acid composition of various vegetable oils on the behavior of flames in the combustion process. The research is important for the substitution of fossil fuel using envi...