RESULTS OF TESTS OF LIGHTNING-RODS WITH UNIVERSAL CLAMPS BY THE APERIODIC IMPULSES OF CURRENT OF ARTIFICIAL LIGHTNING WITH THE PEAK-TEMPORAL PARAMETERS RATIONED ON FOREIGN STANDARDS
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 3
Abstract
Purpose. Test in obedience to the requirements of row of operating foreign standards of round metallic lightning-rods with the flat metallic universal clamps of the special type on firmness to direct action of аperiodic impulses of current of temporal form 10/350 μs by amplitude of 50 кА (N− class) and 100 кА (H− class). Methodology. The order of leadthrough of these tests is certain the followings normative documents: International IEC 62305-1: 2010, Russian national GOST R IEC 62305-1-2010 and German national DIN EN 50164-1:2008 Standards. Results. Conducted on a powerful high-voltage pulsed current of artificial linear lightning with the peak-temporal parameters and admittances of test rationed on the indicated foreign standards rationed that all of the lightning-rods tested in collection with universal clamps, isolating holders and ceramic elements of roof of technical building were survive electrodynamics and electrothermal action of in-use single short blow of an artificial storm digit. Originality. First in domestic practice the similar model tests of lightning-rods are conducted with universal clamps, executed from different explorer materials, on firmness to flowing to on by it the indicated large impulsive currents of artificial lightning. Practical value. Real firmness to lightning of round copper and zincked steel lightning-rods is certain with the flat copper, zincked steel and non-rusting steel universal clamps of the special execution.
Authors and Affiliations
M. I. Baranov, G. M. Koliushko, E. V. Kuzminskiy, Yu. I. Mysyuk, S. V. Rudakov
Keywords
Related Articles
- EP ID EP299880
- DOI 10.20998/2074-272X.2015.3.07
- Views 66
- Downloads 0
GENERATOR ON ARCADYEV-MARX SCHEME WITH PEAKING OF THE PULSE FRONT IN ITS CASCADES FOR FOOD DISINFECTING
Purpose. To obtain experimentally that the duration of the high-voltage pulse front is less than 1.5 nanoseconds on the load of a pulse voltage generator of less than 50 ohms in the form of more than two working chambers...
A 2-POLE WINDING DEVELOPMENT TECHNIQUE FOR ASYNCHRONOUS MACHINES WITH INCREASED NUMBER OF PARALLEL BRANCHES
A 2-pole winding development technique is introduced for asynchronous machines with the number of parallel branches in phases increased in 1.5 and 2 times as compared with the number of poles. The technique is confirmed...
NETWORK-CENTRIC TECHNOLOGIES FOR CONTROL OF THREE-PHASE NETWORK OPERATION MODES
Purpose. The development of the control system for three-phase network is based on intelligent technologies of network-centric control of heterogeneous objects. The introduction of unmanned aerial vehicles for monitoring...
STUDY OF THE INFLUENCE OF MAGNESIUM HYDROXIDE ON THE COMBUSTIBILITY PERFORMANCE OF POLYMER COMPOSITIONS BASED ON ETHYLENE VINYL ACETATE COPOLYMER
Purpose. To obtain the flame retardants polymer compositions for cables tested the effect of use EVA compositions with magnesium hydroxide, on indicators combustibility polymer. Methodology. We used the method of differe...
THE RELEVANCE OF DETERMINING RESPONSIBILITY FOR VIOLATION OF POWER QUALITY IN TERMS OF VOLTAGE FLUCTUATIONS
Purpose. The purpose of work is the analysis of scientific and technical information for determination of expediency of researches on the determined calculations of individual share of suppliers and consumers in violatio...