Review Paper on ph Transmitter Showing Control Functionality
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 3
Abstract
pH is short form for the Power (p) of Hydrogen (H). pH is defined as the negative log of the Hydrogen activity, aH+ or the effective ion concentration. pH is a unit of measure which describes the degree of acidity or alkalinity of a solution. A more effective way to measure pH in an industrial setting is the potentiometric method of pH analysis. Online, continuous measurement method allows the potentiometric method. and Potentiometric analysis involves four parts like sample, sensing ph electrode, electrode reference and amplifier/readout signal. When properly combined the result is accurate, representative pH readings. The pH sensor components are usually combined into one device called a combination pH electrode. Glass is usually used as the measuring electrode. The preamplifier is a signal-conditioning device. The high-impedance pH electrode signal is given to the signal-conditioning device and converts it into a low impedance signal, which is accepted by the transmitter. A transmitter is basically a device, which accepts any measurand and converts that into a standardized transmission signal that is 4 to 20 mA. The signal conditioning process typically involves one or more steps. It involve the steps like isolate , filter & amplify the signal and convert the sensor input signal to a proportional output (4-20mA) signal that is transmitted to another control device or system. To perform this operation PIC controller is used. This paper presents the Industrial pH Transmitter With Control Functionality i.e it adjuses any pH range ( 0-14 pH) and converts that signal into 4 to 20 mA signal.
Authors and Affiliations
Vaishali Kankhare, S. A. Khandekar
Keywords
Related Articles
- EP ID EP21783
- DOI -
- Views 240
- Downloads 5
Disease Detection of Cotton crop using Image Processing Technique: A Survey
Farming is important sector in India for human being, as near about 55-60% people are depends directly and indirectly on it. Among all crops, Cotton is main cash crop in India gives more income to the farmer. Due to dis...
Metaheuristic based Customer Churn Prediction in Telecom
Churn prediction in telecom has turn into a most important requirement due to the increase in the number of telecom supplier. However owing to the immensity sparsity and unnecessary nature of the data, churn prediction...
Mechanical Properties of cementitious composite by using ZnO nanoparticles
The split tensile and the setting time of cement with different Concentration of ZnO Nanoparticles (0.5%, 0.1%, 1.5% , 2.0%,2.5% ,3% by weight) has been studied. the mechanical (flexural and split tensile) strength of t...
Autonomous Robot for Identification of Soil Parameters and Collecting Scrap from Farm
According to UNICEF solid waste can be classified into biodegradable and non biodegradable. Non biodegradable wastes cannot be decomposed by biological process. Plastics and other metals in agricultural field cause many...
Fault Recovery Using Scan Chain Based Approach Technique
Recent applications of all embedded system will get failure due to multiple faults occurring in the system. This fault should be detected and corrected simultaneously while running the system. In practise we use a scan...