Rocket Motor with Composite Casing
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2015, Vol 6, Issue 3
Abstract
The article presents the results of work concerning a two-stage rocket motor. In the first step tested stationary the charge rocket motor with the ignitor and the nozzle system in the ballistic chamber was tested. The technology of composite casing with a caliber of 171 mm, which is also a combustion chamber, was designed and mastered. The composite casing was tested stationary in complete rocket motor. The next step was to conduct dynamic tests at the rocket test range. During the dynamic tests a two-stage rocket with a mass of 70 kg was fired. The rocket has reached a maximum speed of 960 m / s.
Authors and Affiliations
Zbigniew DRABIK, Tomasz RASZTABIGA
Keywords
Related Articles
- EP ID EP77503
- DOI 10.5604/20815891.1166982
- Views 67
- Downloads 0
Model wnikania pocisków uderzeniowych w metalowe przeszkody Część 1. Koncepcja modelu i przypadki szczególne
Celem i przedmiotem pracy jest pokazanie niektórych prawidłowości wnikania przeciwpancernych pocisków uderzeniowych w metalowe przeszkody (płyty) o dużej grubości i masie. Sposób rozwiązania problemu przedstawiono w dwu...
System automatycznej kontroli parametrów toru nadawczo-odbiorczego stacji radiolokacyjnej
W artykule przedstawiono stanowisko, które pozwala na zdalne, automatyczne przeprowadzenie kontroli oraz strojenia analogowego toru nadawczo-odbiorczego stacji radiolokacyjnej. Na potrzeby opracowanego rozwiązania zaadap...
Accuracy Analysis of Aircraft’s Positioning Based on GLONASS Observations
This paper presents an algorithm to estimate aircraft’s position using GLONASS data. For this purpose, the author created specialist CAP (Calculate Aircraft Position) software, which code source was written in Scilab 5.3...
Ammunition Belt for 30 mm Cartridge – Basis of Production Technology
In the paper the basis of production technology of ammunition belt for 30 mm anti-aircraft ammunition are presented. Particular stages of production technology were described: selection of chemical composition, productio...
Experimental Testing of Aramid Composite Applied in Ballistic Armour using Ultrasonic IR Thermography
Reference samples, in which artificial discontinuities (defects) are fabricated, are used to verify non-destructive testing procedures. Artificial discontinuities are known defects of reference samples and enable verific...