SAFETY AND RELIABILITY ANALYSIS OF THE ELEMENTS OF A TECHNICAL SYSTEM
Journal Title: Вчені записки Таврійського національного університету імені В. І. Вернадського. Серія: Технічні науки - Year 2018, Vol 29, Issue 3
Abstract
The study of the technical system elements from the stand point of reliability allows to analyze their work and form conclusions about the system efficiency. The proposed technical and organization al proposals for improving the reliability of the technical system elements at the stage of their design, creation and use. This is valuable for the organization of technological processes with the rapid change operating modes, production requirements to the production facilities reliability. Because reducing the reliability of system elements necessarily leads to an increase in the likelihood of emergencies. The magnitude of the accident risk is estimated using the reliability theory of technical systems and the detection of a hazardous situation sequence.
Authors and Affiliations
Г. І. Туровська, О. В. Богданенко
ANALYSIS AND DETERMINATION OF THE ACTUAL SAFETY OF COAL MINES, DANGEROUS FOR GAS OR POWDER, WITH ACCOUNT OF PERSONNEL, QUIPMENT AND ENVIRONMENT
Production complexes are considered, including mine, from the position of man – machine – environment. According to a uniform methodology, a safety assessment was carried out with subsequent normalization of the required...
ON THE POSSIBILITY OF MANUFACTURE OF POWDER EXTINGUISHING FACILITIES AND EXPLOSION SUPPRESSION
Theoretically and experimentally substantiated approach to the creation of combustion inhibitors by the qualified control of surface properties and structural features of highly dispersed particles of inorganic salts and...
FOOD FILM-FORMATED GELS ON THE BASIS OF URONATE POLYSACCHARIDES IN PRODUCTION OF MIXTURES FOR INJECTION OF MEAT PRODUCTS
The possibility of using food film-forming gels based on sodium alginate and low esterified amidated pectin (uronate polysaccharides) in production of mixtures for injection of meat products was considered. The materials...
DEVELOPMENT OF SCADA-SYSTEM TRACE MODE 6 SIMULATION MODEL, AN AUTOMATIC CONTROL SYSTEM REMOVAL OF OXYGEN IN THE DEAERATOR
The article deals with the development of software for automatic control system of oxygen removal in the deaerator using an oxygen meter. For successful observation and timely correction of the technological process, the...
UPGRADED SYSTEM OF AUTOMATION CONTROL OF THE WATER LEVEL WITH SIGNAL OF THE TEMPERATURE DIFFERENCE IN THE INSTALLATION OF STEAM GENERATION AT POWER UNIT IN VVER-1000 OF NPP
The generation of saturated steam in power units of NPPs with VVER is carried out in steam generators (four steam generators per power unit). The most important regulated parameter in NGPs of NPPs, as well as for TPP boi...