SEISMIC EVALUATION OF STRENGTHENING OF SOFT STOREY BUILDING CONSIDERING EQUIVALENT DIAGONAL STRUTS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 5, Issue 1
Abstract
The term soft storey explain one level of a building that is significantly more flexible than the stories above it. And to counter the effect of soft storey equivalent diagonal struts are used. The frames with unreinforced masonry can be modelled as equivalent braced frames by replacing infills with equivalent diagonal strut. Equivalent Static method of analysis is a linear static procedure, in which the response of building is assumed as linear static manner. The analysis is carried out as per IS: 1893-2002 (Part 1). In this work G+5 storey (six storey) building is taken in which floor wise (changing soft storey position form first to six storey) soft storey is analysis and its contribution in the behaviour of the structure is examined. Soft storey is more flexible as above storey and we will conclude by getting best geometry in seismic zone; thereby geometry of the building shall be optimized by considering 4 building plan for seismic zones-II. The main objective of this thesis is to investigate the effective building frame with different geometry to withstand under seismic parameters. The investigation is to be carried out by conducting- (a) Modelling of building frames considering different geometries (b) Analysis of frames considering seismic parameters (c) Critical study of results in term of moments, forces and deflections
Authors and Affiliations
Abdul Juned Siddiqui
Keywords
Related Articles
- EP ID EP138414
- DOI -
- Views 54
- Downloads 0
LITERATURE SURVEY ON WORMHOLE ATTACK
Security plays an important role in Mobile Ad Hoc Network when data transmission is performed within un - trusted wireless scenario. Various attacks like Black hole, Wormhole, Gray hole and many more have been ident...
DEVELOPMENT OF COMPUTERIZED ELECTRONIC COUNTER AND TIMER USING LCD MONITOR IN NAVAL STATE UNIVERSITY
The main objective of this study was to develop a computerized electronic counter and timer using LCD monitor to be used in cashier’s office of Naval State University, Naval, Biliran, Philippines. This study u...
Effect of Tensile Properties on Heat Treated 0.38% Medium Carbon Steel
The experiment was conducted using 0.38% carbon in steel it was quenched in oil after austenizing and then tempered from 250oC. The experiment was conducted it was hardened at 900oC followed by tempering. The steel exh...
STUDY OF NOISE BEHAVIOR ON MUFFLERS FOR IC ENGINE: A REVIEW
The aim of this paper is to analysis the Muffler for four stroke diesel engine. Muffler or silencer is a device which is used for reducing the amount of noise emitted by the exhaust of an internal combustion engine. Af...
Study of Corrosion Inhibitors (Pennisetum Glaucum extracts) on Mild Steel used in Building Construction
Corrosion of Mild steel IS: 432 (Part I)-1982 in various concentrations of hydrochloric acid and sulphuric acid are studied by Mass Loss method in the absence and presence of the extracts of seeds plant Pennisetum...