Seismic response of a full-scale wind turbine tower using experimental and numerical modal analysis
Journal Title: International journal of advanced structural engineering - Year 2016, Vol 8, Issue 4
Abstract
Wind turbine technology has developed tremendously over the past years. In Egypt, the Zafarana wind farm is currently generating at a capacity of 517 MW, making it one of the largest onshore wind farms in the world. It is located in an active seismic zone along the west side of the Gulf of Suez. Accordingly, seismic risk assessment is demanded for studying the structural integrity of wind towers under expected seismic hazard events. In the context of ongoing joint Egypt–US research project ‘‘Seismic Risk Assessment of Wind Turbine Towers in Zafarana wind Farm Egypt’’ (Project ID: 4588), this paper describes the dynamic performance investigation of an existing Nordex N43 wind turbine tower. Both experimental and numerical work are illustrated explaining the methodology adopted to investigate the dynamic behavior of the tower under seismic load. Field dynamic testing of the full-scale tower was performed using ambient vibration techniques (AVT). Both frequency domain and time domain methods were utilized to identify the actual dynamic properties of the tower as built in the site. Mainly, the natural frequencies, their corresponding mode shapes and damping ratios of the tower were successfully identified using AVT. A vibration-based finite element model (FEM) was constructed using ANSYS V.12 software. The numerical and experimental results of modal analysis were both compared for matching purpose. Using different simulation considerations, the initial FEM was updated to finally match the experimental results with good agreement. Using the final updated FEM, the response of the tower under the AQABA earthquake excitation was investigated. Time history analysis was conducted to define the seismic response of the tower in terms of the structural stresses and displacements. This work is considered as one of the pioneer structural studies of the wind turbine towers in Egypt. Identification of the actual dynamic properties of the existing tower was successfully performed based on AVT. Using advanced techniques in both the field testing and the numerical investigations produced reliable FEM specific for the tested tower, which can be further used in more advanced structural investigations for improving the design of such special structures.
Authors and Affiliations
Kamel Sayed Ahmad Kandil, Ghada N Saudi, Boshra Aboul-Anen Eltaly, Mostafa Mahmoud Abo El-khier
A state of the art review on reinforced concrete beams with openings retrofitted with FRP
The use of externally bonded fiber reinforced polymer (FRP) sheets, strips or steel plates is a modern and convenient way for strengthening of reinforced concrete (RC) beams. Several researches have been carried out on r...
Wind-induced vibrations of structures using design spectra
This paper discusses the estimation of wind dynamic response of two types of structures by following classical and novel approaches. A new method for structural analysis based on wind design spectra is introduced and tes...
The effect of multi-directional nanocomposite materials on the vibrational response of thick shell panels with finite length and rested on two-parameter elastic foundations
The main purpose of this paper is to investigate the effect of bidirectional continuously graded nanocomposite materials on free vibration of thick shell panels rested on elastic foundations. The elastic foundation is co...
Optimal placement of active braces by using PSO algorithm in near- and far-field earthquakes
One of the most important issues in tall buildings is lateral resistance of the load-bearing systems against applied loads such as earthquake, wind and blast. Dual systems comprising core wall systems (single or multi-ce...
A contact element for dynamic analysis of beams to a moving oscillator on tensionless elastic foundation
This paper presents the contact elements for dynamic analysis of Euler–Bernoulli beams to a moving oscillator on tensionless elastic foundation considering discontinuous contact. The elastic foundation is modeled by line...