SELECTION OF RATIONAL PARAMETERS OF THE NOMINAL MODE ELECTRIC TRAINS WITH ASYNCHRONOUS TRACTION DRIVE
Journal Title: Наука та прогрес транспорту - Year 2017, Vol 0, Issue 3
Abstract
Purpose. Parameters of the nominal mode are related to the most important performance indicators of traction means, therefore, the problems of choosing their optimal values always inevitably arise when forming technical requirements for a new rolling stock. The paper describes the features of solving the above-mentioned problems for electric trains with an asynchronous traction drive in the case of two-zone and three-zone frequency control of power. Methodology. Power of nominal mode of the rolling stock should be chosen in such a way that it would be possible to realize a predetermined travel time along in the section or the movement speed. On that basis, and also taking into account the fact that the important operational characteristics of electric trains include the acceleration value during the start-up and acceleration at the design speed, we will formulate the problem of determining the nominal power. In the task for a given range of traction, it is necessary to find such a value of the nominal mode power and the corresponding force value to ensure the ability to carry out transportations with the given level of average speed with minimal energy consumption for traction. At the same time, it is necessary to fulfill the following conditions: a) the speed of the electric train on the section does not exceed the established limits; b) it is possible to realize the given values of accelerations. A more detailed consideration of the problem shows that in real conditions, when the starting acceleration and the mass of the train are given, the problem of determining electric train power is practically reduced to determining the optimal value of the nominal mode speed. Findings. The task of choosing the optimal values of the nominal mode speed is solved by determining the electric power consumption with the variation of the possible values of starting speed. Therefore, only those values that ensure the implementation of the given starting and residual accelerations should be taken into account. The work shows that the traction force value increases with the design speed increase and other equal conditions, if the starting speed is increased. Originality. Authors developed the methodology for determining the optimal values of the nominal mode parameters of electric trains with an asynchronous traction drive, with two-zone and three-zone frequency power regulation. Practical value. The above mentioned methodology can be the basis when forming technical requirements for new rolling stock for Ukraine’s railways.
Authors and Affiliations
H. K. Hetman, S. L. Marikutsa
METHODS OF PRESETING BOUNDARY CONDITIONS AND GEOMETRY OF THE SCREW-PROPELLER IN THE FLOW VISION
Purpose. The article is aimed to: generate 3D models of the screw-propellers under study, as well as the calculation box; carry out a series of numerical experiments to verify the obtained results with the corresponding...
ОСНОВИ МАТЕМАТИЧНОГО ОПИСУ ХВИЛЬОВОЇ МОДЕЛІ ПОШИРЕННЯ НАПРУЖЕНЬ У ЗАЛІЗНИЧНІЙ КОЛІЇ
Мета. В сучасних наукових дослідженнях неодноразово наводились практичні приклади виникнення динамічних ефектів роботи залізничної колії, які виходять за межі статичних розрахункових схем. Особливої актуальності такі пит...
DEFINITION OF «SAFETY BOUNDARY» IN CASE OF TERRORIST ATTACK WITH CHEMICAL AGENTS
Purpose. The work involves the development of a 2D numerical model for calculating the «safety boundary» in the case of a terrorist attack using a chemical agent. The safety boundary is the boundary behind which the emis...
SYSTEM FOR AUTOMATIC SELECTION OF THE SPEED RATE OF ELECTRIC VEHICLES FOR REDUCING THE POWER CONSUMPTION
Purpose. The work is aimed to design a system for automatic selection of the optimal traffic modes and automatic monitoring of the electric energy consumption by electric transport. This automatic system should provide f...
ОСОБЕННОСТИ МИКРОСТРУКТУРЫ ХРОМО-НИКЕЛЕВОГО ПОКРЫТИЯ, НАПЛАВЛЕННОГО ПОРОШКОВОЙ ЛЕНТОЙ ПЛ АН-111 С 50 % ПЕРЕКРЫТИЕМ
Цель. В работе предполагается провести исследование особенностей микроструктуры покрытия, полученного наплавкой порошковой лентой ПЛ АН-111 с 50 % перекрытием валиков. Методика. Износостойкий слой получен электродуговой...