SELECTION PROCEDURE AND PERFORMANCE OF THE TECHNOLOGICAL FEATURES OF SERVICE GENERATED LAYER
Journal Title: Tribologia - Year 2012, Vol 246, Issue 6
Abstract
The paper presents the results of research and analysis on the relationship between selected parameters of different types of machining and the machined surface conditions. Selected parameters and treatment conditions were based on a developed set of mathematical models. These models are an essential element of the first stage of determining the technological and operational characteristics.
Authors and Affiliations
Maciej Matuszewski, Janusz Musiał, Michał Styp-Rekowski
Keywords
Related Articles
- EP ID EP270008
- DOI -
- Views 47
- Downloads 0
THE ASSESSMENT OF AN EFFECT OF ELECTRICAL POTENTIAL INDUCED IN A ROTATING SHAFT-OIL-LIP SEAL SYSTEM ON BRAKING TORQUE
The paper presents the results of measurements of the electric potential and braking torque in the friction junction, which is in a rotating metal shaft–base oil–rotary lip seal system for different ranges of the base oi...
TRIBOLOGICAL PROPERTIES OF CAST IRON EN-GJSFP-500-7 AFTER A BURNISHING PROCESS MODIFIED BY EXPLORATION PREPARATIONS BASED ON SOLID LUBRICANT AND CHEMICAL ACTION
In the paper, the results of research on the base machine oil SN-150 and the exploitative preparations R-2000 (preparation on the basis of soft metals) and Motor LIFE (preparation using chemical actions) influence on the...
THE INFLUENCE OF TRIBOLOGICAL CHARACTERISTICS OF COATED TOOLS ON THE CUTTING PROCESS AND THE QUALITY PARAMETERS OF THE PARTS’ SURFACE LAYER
The influence of cutting tools nanostructured coatings on the cutting parameters and the surface layer parameters of machined parts was researched. The wide range of cutting rates, different work materials, and coated to...
PROBLEMY TRIBOLOGICZNEGO CHARAKTERYZOWANIA SKOJARZEŃ OBUWIE–PODŁOŻE
Charakterystyki tribologiczne podeszew obuwia w skojarzeniu z podłożem są parametrami istotnymi z punktu widzenia bezpieczeństwa jego użytkowania oraz czasu eksploatacji. Metody badania współczynnika tarcia i zużycia sto...
INCREASING THE LIFETIME OF A COUPLE OF CUTTING BLADES FOR PIPE
This investigation seeks to increase the lifetime of a couple of cutting blades pipe. The average life of this pair of blades is about two working shifts, and these blades have fracture and wear problems, which result in...