Sensitivity of phantom contour voltage to complex impedance changes of inhomogeneities in Electrical Impedance Tomography
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2014, Vol 0, Issue 56
Abstract
Introduction. The analysis of surface conductivity influence of inhomogeneities to the changes of complex phantom contour voltages comparing with a homogeneous phantom with complex surface conductivity is carried out. The analysis of the influence of finite element and all phantom generally anisotropy on the calculated complex voltages is conducted. The results. The model of square finite element is obtained. It consists of 1024х1024 finite elements obtained by simplified approximate formulas. The relative increments of voltage values are unchanged regardless of the difference in the absolute values of voltages measured at different positions of the current source. It is proposed to rotate the phantom grids of finite elements and conductivity zones with the current source rotation to overcome this anisotropy. Conclusions. Final conclusions about the limits of the measuring device sensitivity could be done only after the data accumulation of solving the inverse problem by zones conductivity method.
Authors and Affiliations
T. Dostal, I. Sushko, A. Matsai, E. Gaydayenko
The scattering of electromagnetic waves by planar lattice of dielectric resonators
Its present an investigation numerical results of the problem scattering plane electromagnetic waves on dielectric resonator square lattices. Every resonator of lattice is excited on main azimuthally symmetric oscillatio...
Choice of maintaining the resonant mode piezoelectric transducer
Analyzed the possible schemes for constructing ultrasonic generators with feedback, justified the choice of maintaining the resonant mode ultrasonic transducer.
Pattern recognition of 1D- and 2D-images for arbitrary scale of spatial coordinates
Introduction. Possible methods of pattern recognition are described. Transform coefficient, allowing numerically to evaluate the difference between the test and reference signal is proposed. In this case, the reference s...
Method of planning sessions on communication nodes
Communication nodes are main elements of radio communication system, which are making tasks to receive, handle and transmit information. The system of management was established to provide making tasks that belong to com...
The analisis of linear systems in basis of EIWAL transformation
The algorithm for solution of differential equations of liner systems in basis of EIWAL transformation is suggested