Shear bond strength of resin adhesive to laser treated surface of yttria tetragonal zirconia polycrystalline
Journal Title: IP Annals of Prosthodontics and Restorative Dentistry - Year 2017, Vol 3, Issue 1
Abstract
Purpose: This study evaluated the effects of surface treatment of zirconia with erbium-doped yttrium aluminum garnet (Er-YAG) laser on shear bond strength to resin cement. Materials and Methods: Thirty disc-shaped zirconia specimens (10 mm in diameter and 2 mm in thickness) were fabricated, randomly assigned to 3 groups (n = 10) and treated surface with: Gr. N) no treated surface, Gr. S) sandblasted with 50 micron alumina and Gr. L) treated with an Er-YAG laser. Zirconia surface was then applied with metal/zirconia primer prior to be cemented to composite cylinder (5 mm in diameter and 4 mm in thickness) with resin cement. Shear bond strength test was performed at a crosshead speed of 0.5 mm/min. Data were analyzed by ANOVA and Tukey HSD tests. Results: The means and standard deviations of shear bond strength (MPa) were: Gr. N) 10.79 ± 1.03, Gr. S) 14.15 ± 3.07, Gr. L) 14.11 ± 1.98. The treatment of zirconia surface were significantly affected to shear bond of resin adhesive to zirconia (p< 0.05). Treatment surface of zirconia with either Er-YAG laser or sandblast indicated significant higher shear bond strength than no treated surface (p < 0.05). No significant in bond strength between sandblasted surface and Er-YAG treated surface (P > 0.05). Conclusion: Pretreatment of zirconia by Er-YAG laser improved bond strength to resin cement. The study suggested that Y-TZP ceramics should be treated surface with Er-YAG laser before cementation.
Authors and Affiliations
Niwut Juntavee, Apa Juntavee, Thanwarat Yothajun
Keywords
Related Articles
- EP ID EP307424
- DOI 10.18231/2455-8486.2017.0003
- Views 48
- Downloads 0
Iatrosedation- a solution to maladaptive complete denture patients
Behavioral problems are commonly associated with complete denture therapy. There are easily satisfied patients at one end, while at the other end are patients who become office fixtures, complaining of excessive discomfo...
Labelled prosthesis linked to aadhaar card id- a reliable method of human identification in forensic odontology
Personal identification in natural and manmade disasters can be made by using methods like DNA analysis, finger prints, carbon 14 enamel dating, rugaescopy, cheiloscopy, skull shape and size, dental structure chart and v...
Comparative clinical efficacy of four different desensitising agents in relieving post-bleaching sensitivity
Aim: To clinically assess and compare the efficacy on hypersensitivity experienced post-bleaching as an elective cosmetic procedure using four different types of desensitizing agents at four different time intervals. Mat...
Management of a tooth with talon cusp having immature apex
Talon cusp, which is a rare occurrence involving an extra cusp often on the palatal aspect of maxillary anterior teeth can be troublesome to the patient and may require professional intervention. This report describes th...
Walking bleach with sodium perborate tetrahydrate: A safer material and method
In the era of minimum invasive dentistry and increased demand of esthetics intracoronal bleaching in an intact tooth is the most successful yet conservative method Nonetheless oxidative materials such as hydrogen peroxid...