Shielding Effectiveness Measurement Using a DTEM Cell
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
This paper presents a shielding effectiveness evaluation for some metallic threads materials. The tests were performed using a non-standardized method in a dual transversal electromagnetic cell (DTEM). The materials’ shielding characteristics must be properly evaluated in order to choose an appropriate shielding material. The tests were conducted for two different types of material designed for electromagnetic shielding. Material 1 has a low density structure, and Material 2 has a dense structure. The tests were performed with a non-standardized method which uses a simple and economical setup, in two different cases. For the first analyzed case only two components were used: a DTEM cell and an EMI Test Receiver. In comparison with the standardized methods, the non-standardized method one used, does not require large testing space and complicated setup, and the material probe needed for DTEM measurements is considerably smaller than the one necessary for the standardized tests. The second studied case comprised a DTEM cell, an EMI Test Receiver, and a hybrid junction. For the second case, the power level was measured with the hybrid junction connected at the inputs A and B, measuring the sum on the C port, and with the hybrid junction connected in the same way, but measuring the difference from the D port. Analyzing the obtained results with the non-standardized method, in all studied cases for the two materials, one can conclude that the shielding effectiveness is better for the high density material.
Authors and Affiliations
Viorica Voicu, Ion Pătru, Livia-Andreea Dina, Petre-Marian Nicolae, Relu-Adrian Aipu, Ionuţ Daniel Smărăndescu
Keywords
Related Articles
- EP ID EP264078
- DOI -
- Views 119
- Downloads 0
APPLICATION OF FIBER OPTIC INTEGRATED FABRYPEROT INTERFEROMETER FOR NON ELECTRIC QUANTITIES MEASUREMENT IN ELECTRICAL ENGINEERING
The non-electric quantities measurement technologies widely used in the present technique are based on conventional technologies known for many years, which lead to reliable and reproducible results. With a view to measu...
GEOMETRY OPTIMIZATION OF SMES COIL
Superconducting Magnetic Energy Storage (SMES) device is an attractive solution for energy storage. Because the most important element of SMES system is toroidal superconducting coil, the cryogenic technology involved in...
Using a Shape Memory Alloy Spring Actuator to Increase the Performance of Solar Tracking System
The exclusive properties (e.g. one way and two way shape memory effect, superelasticity, etc.) exhibited by shape memory alloys (SMAs) offer the possibility of producing smart sun tracking mechanisms for photovoltaic...
ROCKETS STABILIZATION CONTROL SYSTEMS USING DIFFERENTIATOR OR INTEGRATOR GYROSCOPES
The paper presents the comparison between two angular stabilization systems of the rockets in vertical plane using a differentiator or an integrator gyroscope, an accelerometer and a correction subsystem. One has determi...
ASPECTS REGARDING DETERMINATION OF THE INDUCTION MACHINES PARAMETERS
This paper presents the classical methods used for finding the induction machines parameters; then an original method conceived by the authors is detailed. The method consists in the acquisition of the voltages and curr...