Short circuit radio fuses for 110-150 kV overhead electrical power networks
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2017, Vol 34, Issue 1256
Abstract
The article is dedicated to improving reliability of electric networks with voltage 110-150 kV by application developed special devices latch short circuit. It is proposed on the basis of the developed device of an electromechanical short-circuit breaker for air networks with a voltage of 110-150 kV, the use of a radio channel for transmitting information about the status of the network to duty personnel.
Authors and Affiliations
P. H. Plieshkov, O. I. Sirikov, A. I. Kotysh
Keywords
Related Articles
- EP ID EP408082
- DOI -
- Views 118
- Downloads 0
Determination of frequency-controlled induction motor rotor’s equivalent thermal circuit thermal resistance
The necessity of frequency-controlled induction motor study thermal state is determined by frequent failure of these motors due to overheating of the stator windings, especially in non-stationary modes. The determining m...
Review of new generation of the system of connector mounting of electrical equipment Smissline from ABB
Introduction. Actual tasks in the design of new substations or modernization of outdated equipment in low voltage networks are reducing the time for installation works; rational use of installation space; safety and ease...
An electromagnetic actuator for the medium voltage vacuum contactor
A review of the use of mono- and bistable unpolarized and polarized electromagnets in medium voltage contactors is presented. The analysis of the design features of electromagnetic actuators is carried out and recommenda...
A technique for induction cookers’ inductors calculation
In the paper a technique for the calculation of inductor – main structural part of an induction cooker is proposed. The presented technique is developed on the base of engineering methods for calculation of industrial in...
Step voltage converter as an alternative source for magnetic pulse metal working systems and induction heating systems
The use of preliminary induction heating of the working zone of magnetic-pulse sheet metals working can improve its efficiency and expand the existing range of technological operations for contactless metal working. Inte...