Simulation Analysis in Lateral Torsional Buckling of Channel Section by Using Ansys Software
Journal Title: International Journal of Trend in Scientific Research and Development - Year 2020, Vol 4, Issue 2
Abstract
Design rules for eccentrically loaded beams with open channel cross sections are not available in Indian code IS 800 2000 general construction in steel code of practice third revision . In this study Indian standard medium weight parallel flange ISMCP 175, ISMCP 200, ISMCP 3000 channel beams are used different span length to section height ratio of the beams is taken. The type of loading and the uniformly distributed load application are limited through the web of the channels. General solutions like Elastic critical moment, Slenderness, Reduction factors and the Ultimate loads are determined by using formula given in ANNEX E CL.8.2.2.1,IS 800 2007 for mono symmetric beams and compared with NEW DESIGN RULE snijder and with Finite Element FE simulations on the basis of a parameteric study using ANSYS software 14.0. It is was noticed that mono symmetric formula in code is giving elastic critical moment results upto 0.3 difference with ANSYS result for slender beams but showing larger difference for stocky beams. As the size of beam is increasing with constant cross section it is resulting in reduction in design capacity. The design curve for channel beam proposed by snijder seems to be a good choice , taking torsional effect into account, but it dosent claim to be correct for beams with a ratio L h 15. The results obtained from the IS code formula is matching with ANSYS results for beams having length to depth ratio between range 20 to 40. Akshay Kumar Rathore | Nitesh Kushwah ""Simulation Analysis in Lateral Torsional Buckling of Channel Section by Using Ansys Software"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30037.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30037/simulation-analysis-in-lateral-torsional-buckling-of-channel-section-by-using-ansys-software/akshay-kumar-rathore
Authors and Affiliations
Akshay Kumar Rathore | Nitesh Kushwah
Keywords
Related Articles
- EP ID EP685947
- DOI -
- Views 127
- Downloads 0
A Study on Changing Status of Mithilanchal Villages 1895 2005
The nature of society is changeable. Man is born and grows in a group. He performs his various roles in life and dies. One generation is replaced by another generation. The new generation changes the assumptions and work...
Analysis of Sand Dunes Accumulation using Remote Sensing and GIS
Sand dunes is one of desertification phenomenon that hinder land resources and human activities. It threaten to bury human settlement, roads, farms, water and other resources. Due to many environmental and climate condit...
Nonlinear Modeling and System Identification of a DC Gear Motor with Unknown Parameters
Modeling and identification of industrial systems is an essential stage in practical control design and applications. The paper presents linear, state space, nonlinear modeling and identification of a DC gear motor with...
Extraction and Assessment on Non Catalytic and Catalytic Wij’s Method of Iodine Value Measurement of some Extracted Oils of Different Groundnut Varieties Grown in India
Present research examines the comparison between catalytic or accelerated method with original or non catalytic Wijs method for IV analysis.In the present work, Fast method is used for the measurement of Iodine value IV...
Effects of Satisfaction and Adoption on Online Banking
Despite the importance of online banking in many financial institutions, less research has focused on satisfaction and adoption, especially in Asia. Due to the introduction of technology, a new phenomenon in the banking...