SIMULATION OF GRAVITATIONAL SOLIDS FLOW PROCESS AND ITS PARAMETERS ESTIMATION BY THE USE OF ELECTRICAL CAPACITANCE TOMOGRAPHY AND ARTIFICIAL NEURAL NETWORKS
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2016, Vol 6, Issue 2
Abstract
The paper presents a new approach to monitoring changes of characteristic parameters of gravitational solids flow. Electrical Capacitance Tomography (ECT) is applied for non-invasive process monitoring. Artificial Neural Networks (ANN) are used to estimate important flow parameters knowing the measured capacitances. The proposed approach solves the ECT inverse problem in a direct manner and provides a rapid parameterization of the funnel flow. The simulation of the silo discharging process is performed relying on real flow behaviour obtained from the authors’ previous work. The simulated data are used to new approach testing and verification. The obtained results proved that proposed ANN-based method will allow for on-line gravitational solids flow monitoring.
Authors and Affiliations
Hela Garbaa, Lidia Jackowska-Strumiłło, Krzysztof Grudzień, Andrzej Romanowski
Keywords
Related Articles
- EP ID EP81463
- DOI -
- Views 107
- Downloads 0
ANALYSIS OF INSULATION TRANSFORMERS SYSTEM RISKS FROM SWITCHING OVERVOLTAGES
Intensive devlopment in the area of vacuum switches, usage of vacuum as a extinguishing element, as well as progress in the area of contact materials contributed to broad usage of vacuum circuit breakers in energetics. H...
HYBRID TECHNIQUES TO SOLVE OPTIMIZATION PROBLEMS IN EIT
This paper presents the hybrid algorithm for identification the unknown shape of an interface to solve the inverse problem in electrical impedance tomography. The conductivity values in different regions are determined b...
ANALIZY TERMICZNE GENERATORÓW PRZESTRAJANYCH NAPIĘCIEM
Artykuł przedstawia wpływ temperatury na działanie generatorów przestrajanych napięciem VCO. Przebadane zostały trzy różne struktury układów CMOS. Generator rezonansowy został zaprojektowany i sfabrykowany w technologii...
DEVELOPMENT OF ELECTROMECHANICAL SYSTEM OF A VERTICAL COLLECTOR OF A PERMANENT HOT ZINC-PLATING LINE
The paper presents a mathematical description of a band pulling force in an input collector in dynamic modes. It analyses the structure of an electromechanical system of a band collector with the block of dynamic moment...
ROZWIĄZANIA KONSTRUKCYJNE MASZYN DO ODLEWANIA ROTACYJNEGO TWORZYW POLIMEROWYCH
Do produkcji wielkowymiarowych wytworów takich jak zbiorniki na wodę lub olej, pojemniki na odpady, przydomowe oczyszczalnie ścieków, kajaki, separatory, bariery drogowe i inne wykorzystuje się technologię odlewania rota...