Simulink Model for Cost-effective Analysis of Hybrid System
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 2
Abstract
Utilization of non conventional sources of energy to meet the present day energy requirement has become very much essential in the era of fossil fuel crises. The present paper discusses the importance of PV-Diesel hybrid system to meet electrical requirement in remote areas. A model of a photovoltaic array with diesel battery was designed by MATLAB simulink. In this paper, the cost-effective analysis which includes the fuel consumed, the energy obtained per gallon of fuel supplied, and the total cost of fuel. Simulations done for Diesel generator system, diesel-battery system and solar PV with diesel-battery system using a one-year time period. Based on simulation results energy payback period for PV array, the simple payback time for the PV module calculated. Simulation analysis includes the comparison of system cost, efficiency, and kWh per gallon with those predicted by Hybrid Optimization Model for Electric Renewables (HOMER).
Authors and Affiliations
Raja Sekhar Gorthi
Anaerobic Digestion of Vinasse cane alcohol: The influence of OLR by a UASB reactor
An Anaerobic Sludge Blanket (UASB) reactor was used to study the treatment of distillery effluent. Vinasse was used to feed the reactor, although its Chemical Oxygen Demand (COD) concentration varied during the...
FPGA Based Power Efficient Chanalizer For Software Defined Radio
Multiple communication channel support in RF transmission, such as that in a Software Defined Radio (SDR) warrants the use of channelizers to extract required channels from the received RFfrequency band and to perform fo...
MK-Prototypes: A Novel Algorithm for Clustering Mixed Type Data
Clustering mixed type data is one of the major research topics in the area of data mining. In this paper, a new algorithm for clustering mixed type data is proposed where the concept of distribution centroid is used...
The Diference of Wall Elements State Including the Frf Function
Abstract: The recommendation of Polish PN - B-03002norm shows a need of quality control of wallelements production, and classified them as elements of category I or II. This classificationis decided in institution...
Improving Mechanical Properties of AL 7075 alloy by Equal Channel Angular Extrusion process
The influence of the microstructure and the tensile properties is investigated in specimens of ultrafine-grained materials processed by equal channel angular extrusion (ECAE) through route A, to refine grain size of 7075...