SINTERING OF IRON POWDER MIXTURES AND DETERMINING THEIR MECHANICAL PROPERTIES

Abstract

In this investigation, iron-based powder-metal compacts with two distinctive mesh sizes were sintered utilizing microwave heating framework. Iron-based powders of 100 mesh and 300 mesh were blended with mass portions w =2 % copper (Cu) and 2 % aluminum (Al) and also only with 2% aluminum (Al). PM samples are sintered at a frequency of 2.4GHz at 3kW and a temperature of 700 °C for 45 minutes in normal atmosphere. Mechanical properties, microstructure, and hardness were explored for this sintered component. The most elevated mechanical properties are obtained for 300 mesh, iron-based PM compacts with 2 % Cu and 2% aluminum.

Authors and Affiliations

Keywords

Related Articles

Mechanical and Thermomechanical Properties of Carbon Fibre Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modelling (FDM) Method: a Review

Fused deposition modelling (FDM) is widely used method to fabricate thermoplastic parts, which are mainly used as rapid prototypes for functional testing with advantages of minimal wastage, and ease of material change. D...

CFD Analysis of F-16 Falcon

Development of a fast-moving aircraft with high lift coefficient and low drag coefficient is an essential requirement for the current scenario to support to modernize the military capability of any independent Nation. In...

Shear Stress Analysis in Palm Kernel Shell Reinforced Brake Linings

The load applied to the pad during breaking to slow the moving vehicle tends to cause shear in the pad material as it rubs on the disc surface. Depending on the nature and composition of the pad material, the load applic...

EFFICIENT INFORMATION MANAGEMENT IN TECHNICAL EDUCATION SYSTEM SUPPLY CHAIN USING DATA INTEGRATION SYSTEM (DIS)

For today’s education systems’ success, effective policy-making and system monitoring through data and information are essential. Using education management information systems (EMIS), many countries all over the world g...

Manufacture and Analysis of MgB2 Superconducting Wire with Addition Carbon Nano Tube (CNT) by In-Situ

The study has been conducted on making samples of MgB2 superconducting wire, by adding 1% CNT with situ method. MgB2 is a superconducting material that has a critical temperature of 39 K. The making process begins with w...

Download PDF file
  • EP ID EP376990
  • DOI -
  • Views 82
  • Downloads 0

How To Cite

(2018). SINTERING OF IRON POWDER MIXTURES AND DETERMINING THEIR MECHANICAL PROPERTIES. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ), 8(3), 59-66. https://europub.co.uk/articles/-A-376990