slugDesign Development and Fabrication of Pic Microcontroller Based Embedded System For Temperature Monitoring
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2014, Vol 2, Issue 5
Abstract
In this paper, Data acquisition system found wide spread application in monitoring and controlling of some physical parameter in the industry. Keeping in view the requirement of industry, this project is intended to design and develop a data acquisition system (DAQ) which is able to process the data and display it on the computer through the serial port. The heart of any DAQ system is the microcontroller, which is programmed according to the desired requirement. This project uses PIC18F4550 microcontroller which performs the enumeration, data acquisition and data transfer operations. The objective of this project is to develop hardware and software to monitor the temperature using LM35 sensor. First a voltage signal is generated from the sensor then this voltage signal is fed to microcontroller which process the signal to gives the corresponding output in digital form through its inbuilt analog to digital converter. This output is then calibrated and displayed on the computer.
Authors and Affiliations
Rashid Mustafa, Mohd. Junaid Khan
Keywords
Related Articles
- EP ID EP18106
- DOI -
- Views 298
- Downloads 10
slugTrapdoor Exposure using Markov Model
Mobile network is one of most common ad hoc network with problems related to congestion and routing. Trapdoor exposure disrupts routing protocols by short circuiting the normal flow of routing packets. Such a type of at...
Design and Analysis of Aircraft Windshield by Using FSI Technique
The windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Windshield is an important assembly of an aircraft and some master features are depended on its quality. The important qualit...
Mathematical Modelling and CFD Simulation of Cavity Formation and its Elimination in Water Jet Pump Using Fluent
when we change inlet pressure the pressure drop is decreased and cavity is reduced or vapor pressure is reduced in efficient manner. Again when we simulate the problem by increasing both inlet and outlet pressure same p...
Low Power Cam Gain High Speed with Parity Bit and Power Gated Ml Sensing Technique
Content addressable memory (CAM) it compares input search data against a table of stored data and returns the address of matching data. It have a single clock cycle throughput and make them faster than other hardware, s...
Microstructure and Mechanical Property Changes During TIG Welding of 31000-H2 (IS-737) Aluminium Alloy
Welding, as one of the most effective joining methods for metals, has been extensively applied in engineering usage since a long time. The determination of microstructure and mechanical properties of welded structures i...