SODIUM CAPRYLAMPHOPROPIONATE AS EFFECTIVE ADDITIVE AFFECTING LUBRICATING PROPERTIES OF WATER
Journal Title: Tribologia - Year 2010, Vol 234, Issue 6
Abstract
The subject matter of this paper is a continuation of research on water and surface active agents as lubricants. It is assumed that data obtained shall be used to develop working fluid formulations. The additive chosen, sodium caprylamphopropionate (acronym: CyNa), is an amphoteric surfactant. The seizure properties of water based solutions of CyNa were determined by the four-ball tester (T-02). Scuffing load (Pt), seizure load (Poz) and limiting pressure of seizure (poz) were determined.<br/><br/>
Authors and Affiliations
Marian W. Sułek, Anna Bąk
Keywords
Related Articles
- EP ID EP517219
- DOI -
- Views 44
- Downloads 0
THE INFLUENCE OF TEMPERATURE ON COEFFICIENT OF MAGNETIC SUSCEPTIBILITY χ OF FERRO-OILS WITH DIFFERENT CONCENTRATIONS OF MAGNETIC PARTICLES
In this paper, the authors presented research concerning the determination of the relation between magnetic susceptibility coefficient χ of ferro-oil and temperature changes. The tests were conducted on the ferro-oil sam...
THE EFFECT OF SURFACE ROUGHNESS ON THE TRIBOLOGICAL PROPERTIES OF SLIDING ELEMENTS IN MATERIAL ASSEMBLY SiC–42CrMo4
The results of the investigations of sliding pairs of SiC ceramics and 42CrMo4 steel are presented in the article. The steel surface was prepared with three different technological methods of finishing. The surface rough...
THE EFFECT OF MeC NANOPARTICLES ON THE MICROMECHANICAL AND TRIBOLOGICAL PROPERTIES OF CARBON COMPOSITE COATINGS
Nanocomposite carbon coatings composed of a nanocrystalline phase and an amorphous carbon matrix (a-C or a-C:H) are an important group of coatings for tribological applications, especially if low friction is desired. Str...
STEEL WEAR RESISTANCE 100CrMnSi6-4 AFTER ABLATION LASER TEXTURE
We analysed the results of tribological laboratory model tests, including measurements of temperature, friction force, and wear, in the model friction for samples made of 100CrMnSi6-4 steel. Measurements were made using...
THE INFLUENCE OF ELECTROLYTIC-PLASMA NITRIDING ON THE STRUCTURE AND TRIBOLOGICAL PROPERTIES OF HIGH-SPEED STEELS
The effect of the electrolytic-plasma nitriding on a structure and tribological properties of the R9, R6M5 and R18 type high-speed steels (HSS) has been investigated. It is shown that, after this treatment at the tempera...