Solid-State Characterization and Interconversion of Recrystallized Amodiaquine Dihydrochloride in Aliphatic Monohydric Alcohols
Journal Title: AAPS PharmSciTech - Year 2016, Vol 17, Issue 2
Abstract
Amodiaquine dihydrochloride monohydrate (AQ-DM) was obtained by recrystallizing amodiaquine dihydrochloride dihydrate (AQ-DD) in methanol, ethanol, and n-propanol. Solid-state characterization of AQ-DD and AQ-DM was performed using X-ray powder diffractometry, Fourier transform infrared spectroscopy, thermogravimetry, and differential scanning calorimetry. All recrystallized samples were identified as AQ-DM. Crystal habits of AQ-DD and AQ-DM were shown to be needle-like and rhombohedral crystals, respectively. When AQ-DD and AQ-DM were exposed to various relative humidity in dynamic vapor sorption apparatus, no solid-state interconversion was observed. However, AQ-DM showed higher solubility than AQ-DD when exposed to bulk water during solubility study, while excess AQ-DM was directly transformed back to a more stable AQ-DD structure. Heating AQ-DM sample to temperatures ≥190°C induced initial change to metastable amorphous form (AQ-DA) which was rapidly recrystallized to AQ-DD upon ≥80%RH moisture exposure. AQ-DD was able to be recrystallized in alcohols (C1-C3) as AQ-DM solid-state structure. In summary, AQ-DM was shown to have different solubility, moisture and temperature stability, and interconversion pathways when compared to AQ-DD. Thus, when AQ-DM was selected for any pharmaceutical applications, these critical transformation and property differences should be observed and closely monitored.
Authors and Affiliations
Wiriyaporn Sirikun, Jittima Chatchawalsaisin, Narueporn Sutanthavibul
Keywords
Related Articles
- EP ID EP682165
- DOI 10.1208/s12249-015-0355-4
- Views 53
- Downloads 0
Formulation Development of Spherical Crystal Agglomerates of Itraconazole for Preparation of Directly Compressible Tablets with Enhanced Bioavailability
The objective of the present work was to formulate tablet dosage form of itraconazole with enhanced bioavailability. Spherical crystal agglomerates (SCA) of itraconazole prepared by quasi emulsification solvent diffusion...
Colon-Targeted Oral Drug Delivery Systems: Design Trends and Approaches
Colon-specific drug delivery systems (CDDS) are desirable for the treatment of a range of local diseases such as ulcerative colitis, Crohn’s disease, irritable bowel syndrome, chronic pancreatitis, and colonic ca...
Controlled Extraction Studies Applied to Polyvinyl Chloride and Polyethylene Materials: Conclusions from the ELSIE Controlled Extraction Pilot Study
The effective management of leachables in pharmaceutical products is a critical aspect of their development. This can be facilitated if extractables information on the materials used in a packaging or delivery system is...
The Effect of Moisture on the Flowability of Pharmaceutical Excipients
The effect of moisture content on flowability of six pharmaceutical powders (microcrystalline cellulose (MCC), hydroxypropyl methylcellulose (HPMC), carboxymethyl cellulose (CMC), polyvinylpyrrolidone (PVP), corn starch,...
Exploring Microstructural Changes in Structural Analogues of Ibuprofen-Hosted In Situ Gelling System and Its Influence on Pharmaceutical Performance
The present work explores inner structuration of in situ gelling system consisting of glyceryl monooleate (GMO) and oleic acid (OA). The system under study involves investigation of microstructural changes which...