Some Aspects Regarding the Influence of the Tribologycal Factors on the Superficial Layers of Treated Steels with Plasma Nitriding
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 4
Abstract
Some 38MoCrAl09 (SAE 4038) steel grade samples were subjected to plasma nitriding treatment regimes. The structural and diffractometric aspects of the superficial layers of the steel are studied after the wear tests by friction, using an Amsler type machine, taking two sliding degrees at different contact pressures and testing time. The tests were made to detect the sustainability to the material, the evolution of the superficial layer through different tests and to establish the influence of these tribological factors (operating parameters) on the superficial layers.
Authors and Affiliations
Carmen Penelopi PAPADATU, Elisabeta VASILESCU
Keywords
Related Articles
- EP ID EP609147
- DOI -
- Views 43
- Downloads 0
Corrosion Behaviour and Biocompatibility of 316 Stainless Steel as Biomaterial in Physiological Environment
Although stainless steel is a material widely used for biomedical applications, its surface properties for long term application are still a serious concern. 316L stainless steel (SS 316L) is a material commonly used in...
The Consequences of Heavy Metals Impact on Primary Teeth
Since the metals deposited in the teeth during formation and mineralization processes are to a large extent retained, human teeth receive a considerable attention as indicators of heavy metal exposure. The objective of t...
Opportunities to Analyse the Pollution in Metallurgical Industry
The metallurgical industry is a highly polluting economic sector. In order to establish measures to minimise the pollution, new methods are needed to analyse such processes. This article analyses the following possibilit...
Load Behavior of an Vertical Axle Wind Turbine Model With a Four Blades Periodically Coupled Aerodynamically
The paper is based on experiments conducted on the wind tunnel at low wind speeds (<4.5 m/s), on an experimental wind turbine model of the Savonius type with four blades and a D/H ratio of 2.6. The four blades are period...
Effect of ZrO2 Nanoparticles on the Mechanical and Anticorrosion Properties of Epoxy Coating
Homogeneous epoxy coatings containing ZrO2 nanoparticles were applied on Grade A naval steel substrates. The morphology of the coating was characterized by optical microscopy and scanning electron microscopy. The effect...