Some Researches on the Cutting Process Using a Stamping Device
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 1
Abstract
The cutting process of the parts from the plates and strips consists in the action of two active elements of the stamping machine: device punch and active plate. The main actors on which the cutting process depends are the thickness and the mechanical characteristics of the material to be cut, the state of the edges of the active elements and the clearance between the active elements. This paper presents the results of the research on the variation of the stamping force depending on the thickness and the stamp clearance for the maximum cutting force.
Authors and Affiliations
Nicolae CANANAU, Ovidiu DIMA, Dinel TANASE
Keywords
Related Articles
- EP ID EP629282
- DOI -
- Views 64
- Downloads 0
Evolution of Copper Microstructure Subjected to Equal Channel Angular Pressing
This paper aims to study bulk severe plastic deformation processes capable to produce ultrafine grain and also nanostructured 3D materials, interesting for processing in current industry. Samples of copper alloy were sol...
Experimental and Theoretical Investigations on Mode I Crack Propagation in Notches under Cyclic Loading
Research works regarding crack opening stresses covering various types of Mode I cracks initiated and growing in notches under cyclic loading are shown. A large number of parameters influence the crack opening behavior,...
Thin Metallic Superficial Layers With Special Properties Deposed on Steels by Electric Discharge in Impulse
The surface engineering, as interdisciplinary technical science is a relative new concept which appeared in high developed countries as a result of the processing of the metallic materials with distinct properties and as...
Surface Hardening for Low Carbon Steel (A3k) by Yag: Nd Pulse Laser Thermal Activation
The paper is based on experiments for surface hardening on A3k (low carbon steel) samples using YAG:Nd pulse laser. A small x-y moving system conducted by PC was made for sample scanning, relative to fixed focused laser...
X-Ray Diffraction Study of the Reverse Martensitic Transformation In Cu-Al-Ni Shape Memory Alloy
The paper presents an X ray diffraction study for a cooper based shape memory alloy. The behavior of CuAl13Ni4 alloy, which exhibits a peculiar property, is evaluated by structural changes. On cooling, the martensitic tr...