Sorption performance of ethylene glycol dimethacrylate and methacrylic acid copolymers with different cross-link ratio towards rare earth elements
Journal Title: Хімія, фізика та технологія поверхні - Year 2018, Vol 9, Issue 1
Abstract
Sorption materials for rare earth elements based on ethylene glycol dimethacrylate and methacrylic acid copolymers with different cross-link ratio have been synthesized by ion-imprinting method. Two approaches of ion-imprinted polymers elaboration – chemical immobilization and trapping – have been applied. The obtained materials have been characterized via scanning electron microscopy and IR-spectroscopy. The synthesized polymers exist as aggregates of plate-like particles with slit-shaped pores. The specific surface area of obtained sorbents varies from 109 to 350 m2/g. Sorption performance of synthesized polymers towards rare earth ions as well as its dependence on cross-link ratio and ion-imprinting version has been investigated. The sorption materials under study exhibit best sorption efficiency towards rare earth elements in solutions with pH 6. The maximum sorption capacity of the obtained sorbents is around 0.3 mmol/g. According to these results, imprinted polymer with cross-link ratio 80 % synthesized via trapping approach is characterized by the highest distribution coefficient values. The observed tetrad effect for rare earth elements adsorption reflects the chemical nature of adsorption process on the synthesized materials.
Authors and Affiliations
Z. Yu. Bunina, K. Yu. Bryleva, O. I. Yurchenko, K. M. Belikov
Keywords
Related Articles
- EP ID EP459336
- DOI 10.15407/hftp09.01.080
- Views 117
- Downloads 0
Ion-exchange strengthening of lithium-aluminosilicate glass-ceramic protective materials
In view of the intensive increase of the military threat and the rapid weapons development in the world, it is necessary to improve the armored elements for individual and local protection, in particular, by increasing t...
Пленки CdS на пористой подложке Si, полученные методом химического поверхностного осаждения
В работе получены пленки CdS на пористых полупроводниковых подложках Si путем химического поверхностного осаждения. Изучено морфологию и химический состав полученных структур. Рассмотрена возможность применения гетеростр...
Вплив складу агресивного середовища на корозійну тривкість багатокомпонентних аморфних сплавів на основі Fe
Електрохімічними методами оцінено корозійну тривкість ряду аморфних сплавів Fe78.5Ni1.0Mo0.5Si6.0B14.0, Fe65.58Мо4.69Cr7.92P6.93Si2.85B5.94, Fe55Ni20.28Cr7.04Mo1.61V1.07B6.56Al2.67Si1.07 в агресивних середовищах H2O, HCl...
Люминесцентные материалы на основе органических солей, пиролизованных на поверхности кремнезема
В последнее время широкое внимание исследователей привлекает особый вид наноматериалов - углеродные наноточки (УНТ), благодаря их низкой токсичности, хорошей биосовместимости, химической инертности, высокой фотостабильно...
Effect of mechanochemical modification on properties of powder tin(IV) oxide and oxohydroxide
We studied mechanochemical modification of low-dispersed SnO2 and high-dispersed SnO(OH)2 powders with specific surface area 6 and 198 m2/g. They are perspective materials for photocatalysis and adsorption. The aims of w...