SPOSOBY I SREDSTVA BOR'BY S PYL'YU I KONTROLYA KONTSENTRATSII PYLI V ATMOSFERE UGOL'NYKH TERMINALOV MORSKIKH PORTOV S ISPOL'ZOVANIYEM POSLEDNIKH DOSTIZHENIY V OBLASTI AVTOMATIZATSII I PYLEPODAVLENIYA []
Journal Title: Вестник научного центра по безопасности работ в угольной промышленности - Year 2017, Vol 0, Issue 3
Abstract
The article considers and assesses the current situation on dust control at coal terminals. The methods and means used to control dustiness are considered and their analysis is carried out. It is established that existing measures to achieve environmentally safe status are not enough. The ways to solve the problem are suggested. As the main technical solution, a comprehensive approach including a means for controlling the concentration of dust in the air with real-time data output to the dispatcher's console and dust control means presented by a pneumatic hydroshock system using compressed air energy and chemical additives to improve irrigation efficiency was used. Selection and development of this method of dust control due to the need to reduce consumption for irrigation and ensuring optimum for dust fine water mist. Monitoring of the efficiency of the system of pneumatic hydraulic irrigation is also carried out on the dispatcher's console. The article proves the universality of the system of pneumohydraulic irrigation and the possibility of its application is not only at coal terminals, but also wherever it is necessary to carry out anti-dust measures.
Authors and Affiliations
A. A. Khristoforov, D. A. Kuznetsov, I. A. Artushin
Keywords
Related Articles
- EP ID EP231727
- DOI 10.26631/arc3-2017-57-67
- Views 83
- Downloads 0
DETERMINATION OF THE CONTROL POINTS QUANTITY AND THEIR LOCATION IN THE PROTECTED OBJECT FOR HIGH-SPEED MULTIPOINT ELECTRO-OPTICAL SYSTEM FOR FIRE DETECTION AND DETERMINE ITSSPATIAL COORDINATES
The approach to determining of control points quantity and their arrangement on protected object for high-speed multipoint electro-optical system of fire detection and determine its spatial coordinates (EOS) is described...
REGISTRATION OF SURFACE SEISMIC VIBRAAQUIFERS DEPTH DETECTION BY ELECTRON TOMOGRAPHY METHOD IN KUZBASS CONDITIONS
Electron tomography usage in order to detect the watered sections boarder lines of coal and rock massif is reviewed, open pit mine hydro-geological conditions eld tests results are described. They are made on the basis...
METHANE-AIR MIXTURE NONSTATIONARY COMBUSTION PROCESS IN COAL MINES MODELING TASK STATEMENT
The mechanisms of the flame acceleration and combustion transition to detonation in a coal mine conditions are considered. Approaches are analyzed to the flame acceleration study and combustion transition to detonation;...
DUST DEPOSITION INTENSITY METHOD AND CONTROL SYSTEM DEVELOPMENT IN ORDER TO INCREASE THE UNDERGROUND COAL MINE OPENINGS DUST EXPLOSION SAFETY
The article presents the results of a long-term complex of laboratory and mine studies, according to which the regularities of dust deposition intensity along the network of mine openings in the coal mines of Kuzbass wer...
DETONATION OF REACTIVE GAS MIXTURES AS PROBLEM OF FOCAL THERMAL EXPLOSION
In order to create a detonation of mine gas, it is necessary to mix the original components in certain proportions, after which even a small thermal heterogeneity can cause an explosion. The ignition of gas-dust-air mixt...