STATIC CHARACTERISTIC ANALYSIS OF CONCRETE-FILLED STEEL TUBE TIED ARCH BRIDGE
Journal Title: Acta Mechanica Malaysia (AMM) - Year 2018, Vol 1, Issue 1
Abstract
Based on a concrete-filled steel tube rigid frame tied arch bridge, the finite element model of the bridge is built with large general structure finite element program ANSYS. Each construction stage will be considered as the real engineering too, so to determine the design tensile force of the tie-bar in all stages. Though comparing the inner force of the arch rib with different arch axis coefficient, the reasonable arch axis shape will be identified finally. At last, stress superposition theory is used to check the stress in the arch rib; the related research results and conclusion can supply experience and practical reference to another homologous tied arch bridge.
Authors and Affiliations
Luo Xu
Keywords
Related Articles
- EP ID EP402891
- DOI 10.26480/amm.01.2018.08.11
- Views 95
- Downloads 0
STUDY ON PC CONTINUOUS GIRDER MECHANICAL PROPERTIES BASED ON TENDON TENSIONING PATTERN
prestressed concrete continuous box girder in China. With the change of condition in the construction site, the construction sequence of the bridge will be changed inevitable, so to adjust the tendon tension mode accordi...
POTENTIAL OF MUNICIPAL SOLID WASTE IN LIBYA FOR ENERGY UTILIZATION
Municipal Solid Waste (MSW) management is a chronic environmental problem in most of the developing countries, including the Libya. The concept of Waste-to Energy (WTE) is known as one of the several technologies capable...
RESEARCH ON ANTI-OVERTURNING PERFORMANCE OF MULTI-SPAN CURVED GIRDER BRIDGE WITH SMALL RADIUS
Since the severe situation of small radius curved girder overturning accidents in recent years in China, the research of anti-overturning performance with these bridges are becoming more and more important. In this paper...
MODELING AND KINEMATICS SIMULATION OF PLANE TEN-BAR MECHANISM OF WARP KNITTING MACHINE BASED ON SIMCAPE/MULTIBODY
A kinematics simulation model was established for the driven-latch needle of warp knitting machine, and the simulation was implemented by using SimMultibody. Thus, the simulation curves of displacement, velocity and acce...
DESIGN AND EXPERIMENT OF RECIPROCATING DOUBLE TRACK STRAIGHT LINE CONVEYOR
In order to realize the bidirectional transportation of materials, a reciprocating double track linear conveyor is designed in this paper. The conveyer uses the piezoelectric vibrator as its driving force source to drive...