STATISTICAL CONTROL OF THE PRODUCTION PROCESS OF ROLLED PRODUCTS
Journal Title: UNKNOWN - Year 2018, Vol 20, Issue 3
Abstract
The article presents the results of the use of SPC tools, i.e. control charts and indicators of the qualitative capability to assess the stability and capability of the production process of rolled products - I-sections. Statistical analysis of the collected data regarding the selected feature of the analysed product - the width of the foot, and the normality of the distribution were done, which showed that the obtained distribution of measurement results is not a normal distribution. As a result, appropriate SPC procedures for non-normal distribution were used. The Pareto-Lorenzo diagram and FMEA method were also used to obtain information about the structure of non-conformities of the analysed product and the level of risk associated with them. This information was used to propose corrective actions and improve the production process of rolled products.<br/><br/>
Authors and Affiliations
Krzysztof Knop
Keywords
Related Articles
- EP ID EP517688
- DOI 10.30657/pea.2018.20.06
- Views 49
- Downloads 0
Comparison of low and high frequency fatigue tests
The paper presents the results of low and high frequency fatigue tests carried out on nodular cast iron. The specimens of synthetic nodular cast irons from three different melts were studied in the high cycle fatigue reg...
BEHAVIOUR BASED SAFETY (BBS) - ADVANTAGES AND CRITICISM
Behaviour-Based Safety (BBS) is a popular approach to enhancing occupational safety, with many researchers reporting successes of implementing BBS programs. There are, however, studies that see this approach as illusory,...
OBTAINING OF BIOMORPHIC COMPOSITES BASED ON CARBON MATERIALS
Aim of this paper is to present the properties of carbon preforms for the production of biomorphic composites. Carbon samples were obtained through pyrolysis of paulownia wood, replicating the microstructure of the cellu...
Mechanical and mathematical research of local deformations of a steel roller shell with a variable geometry of contact surface
The article is devoted to solving the fundamental and applied problem of nonlinear structural mechanics of machines by introducing into the drum two additional stop cylinders with supporting rollers at the end and adjust...
Plastic production machinery – the evaluation of effectiveness
In this paper TPM and PAMCO coefficients were shortly characterised. On the basis of TPM coeffi-cients its effectiveness was estimated. Thanks to using time and PAMCO coefficients, the utilization of working time machine...