Steering System of Electric Go-Kart
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 1
Abstract
Manual rack and pinion steering systems are commonly used due to their simplicity in construction and compactness. The main purpose of this paper is to design and Manufacture manual rack and pinion steering system according to the requirement of the vehicle for better Manoeuvrability. Quantities like turning circle radius, steering ratio, steering effort, etc. Are inter-dependent on each other and therefore there are different design consideration according to the type of vehicle. A virtual rack and pinion assembly can be created using software like Solid works and Ansys.
Authors and Affiliations
Mohd Yousuf Ahmed, Asfan Mohiuddin, Mohd Sayeed, Kalamullah Akhtar, Md Nawaz
Keywords
Related Articles
- EP ID EP23076
- DOI -
- Views 315
- Downloads 6
Study of Addition of Waste Plastic in Dense Bituminous Macadam with Stone Dust and Bagasse Ash as Filler
Dense bituminous macadam (DBM) is composition of mineral aggregates and bitumen with proportion, the materials should resist the repeated traffic loads. The present situation availability of waste materials is increases...
Embedded Voice Controlled Computer For Visually Impaired and Physically Disabled People Using Arm Processor
This paper gives the design and implementation of embedded voice controlled system using ARM cortex A7 for visually impaired and physically challenged people. ARM cortex A7 has features such as low power consuming than...
Artificial Neural Network Based Prediction of Removal of Basic Dye from Its Aqueous Solution Using Activated Carbon
Management of solid wastes and liquid effluents are a great menace and has become a formidable social problem. Many countries including India find it difficult to have a control on it. Disposal of highly coloured water...
A Novel High Voltage Gain Boost-Fly backForward Converter with Voltage Multiplier Cell for Solar Fed Induction Motor Drive Application
A high voltage gain boost-fly back converter with voltage multiplier cell is proposed in this paper to avoid the exceptionally slight turn-off period and to decrease the current ripple. The voltage multiplier unit is co...
A Distributed Generation Based Inverters for Optimal Decentralized Voltage Control in Distribution Systems using Fuzzy Logic Controller
In recent times, the penetration of Distributed Generation (DG) has been increasing rapidly. This growth of distributed electricity supply of renewable energy sources (RES) so called distributed generation (DG) can caus...