Stochastic Analysis of Land Degradation on Edo State Agricultural System
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 1
Abstract
Edo state, like many other states in Niger-Delta and Nigeria as a nation has resultant land and water degradation problems such as persistent oil spillage, erosion of arable land, sedimentation of dam and reservoirs. This research study investigates the effects of land degradation in all the local government areas in Edo state. The results of the findings indicated that 28% corresponding to 634,416.3 ha of arable land had totally been affected by soil erosion. Highest erodibility index of 0.75 was obtained at Estako west (Auchi), while least value of 0.1 was found at Akoko-Edo local government area respectively. Between 1976 and 1997, 1,820,410.50 barrels of crude oil spilled with maximum spill value 600,511.02 barrels in 1984 and minimum spill of 5,956 barrels in 1989. Reduction of cassava production was estimated and analyzed. The result showed that the reduction is highly significant at 95% confidence interval. Etasko -west had the highest reduction from 7.26 MT/HA in 1993 to 1.1 MT/HA in 2002. In addition, analysis of erosion and land degradation control expenditures showed that little attention has been paid to controlling land degradation in the state. Erosion control expenditure was increased from 4.1% in 1990 to 10% in 2002. This increase is not significant at 0.01 and 0.05 levels of significance. All these constraints affect agricultural production, human well-being, social and economic growth of the people in Edo state.
Authors and Affiliations
Olotu Yahaya, Diamond Blessing, A. G. Dagona, T. A. Morakinyo
Special Pattern of Hydraulic Dissipation System used for Isolation of Bridges against Earthquakes
The construction sector experienced a constant evolution over time, so that today structures can be made to withstand earthquakes of considerable magnitude. This can be achieved by using various methods to counteract the...
Particular Matrix in the Study of the Index Hour Mathematical Model
The three phase transformer clock hour figure mathematical model can be conceived in his regular form as a 3X3 square matrix, called matrix code, or as a matrix equation, called code equation and is conceived through the...
Overview of the Orientation of Solar Generator Surfaces for Photovoltaic (PV) Systems
One of the most readily, espacialy for households as well as for higher installed power, renewable energy techniques to generate electrical power, are the solar photovoltaic (PV) systems. In the designing process of sola...
Numerical Study of Shear Stress Around an Ideal Roughness
In EHD lubrication conditions the viscosity of the lubricants increases, occuring at high shear rates of plastic behavior. Previous researches showed that the shear stress in the film thickness of the lubricant may vary,...
Optimizing the Geometry of a LHy-M Hybrid Locomotive’s Chassis by Resistance Calculations
Starting from the initial geometry of the LDH 1250 CP locomotive chassis, the work aimed to optimize the geometry in the sense of maximum stresses reduction by geometric changes and the reinforcement of the structure. Th...