Strain Behaviour in Composite Plate Girders with Imperfect Shear Connection

Journal Title: Jurnal Kejuruteraan - Year 2016, Vol 28, Issue 1

Abstract

This paper is concerned with the experimental study on the behaviour of strain in steel-concrete composite plate girders having imperfect shear connection. A number of slender girders of practical size were loaded to failure under shear applied at the mid-span. The main variables considered in this study are the longitudinal spacing of stud connector, diameter of stud shank, number of studs along the upper flange and concrete strength. Strains were measured extensively at specified load levels and locations across the concrete slab width and across the whole depth of the girder. The test results have shown variations of strain from girder to girder due to effects of reaction at supports, compression and tension parts of the girders as well as imperfection in the shear connection. Strains across the slab width show arbitrary respond with maximum tension and compression values of 4284μɛ and 4622μɛ, respectively. Across the girder depth, girders with low degree of shear connection display high step change to the extent of 736μɛ due to incompatibility between two strains at the interface. Slip strain is found maximum near the mid-span of the girders in all cases.

Authors and Affiliations

Mohd Yazmil Md Yatim, Nandivaram E. Shanmugam

Keywords

Related Articles

Polyaniline Composite Membranes Synthesis in Presence of Various Acid Dopants for Pressure Filtration

Polyaniline is a conductive polymer that is recently used as a material in producing a pressure filtration membrane. Polyaniline can be doped in various acids as dopants of different sizes and shapes to modify its inhere...

Sun Outage Calculator for Geostationary Orbit Satellites

Sun outages in satellite communication occur when the sun, a powerful broadband microwave noise source, passes directly behind the satellite (when viewed from Earth), causing the receiver with the beam directed towards t...

Factors that Affect Cycling Transportation Mode for Postgraduate Students at Universiti Kebangsaan Malaysia by Logit Method

The main aim of this study is to investigate the factors that affect cycling transportation mode and give suggestions to encourage students to use these facilities to decrease the use of motorized transportation. Firstly...

Vortex Measurement at Bell-Shaped Pump Inlet Using Particle Image Velocimetry

The vortex formed at the pump intake is known to be the main factor affecting the performance of a pump and it contributes directly to the increase of energy consumption. This study was aimed at obtaining an in-depth vis...

Modelling of Transportation Policies to Encourage Shifting from Private Car to the Public Transport Usage in Putrajaya

The rapid growth of car ownership in Malaysia has led to a number of problems such as air contamination, traffi c jams, numerous accidents, extensive fuel consumption and greenhouse effect. The proper solution is by incr...

Download PDF file
  • EP ID EP322067
  • DOI 10.17576/jkukm-2016-28-05
  • Views 112
  • Downloads 0

How To Cite

Mohd Yazmil Md Yatim, Nandivaram E. Shanmugam (2016). Strain Behaviour in Composite Plate Girders with Imperfect Shear Connection. Jurnal Kejuruteraan, 28(1), 37-52. https://europub.co.uk/articles/-A-322067