Strength Properties of Concrete by Replacing Coarse Aggregate with Blast Furnace Slag and Fine Aggregate with Crusher Dust
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2014, Vol 2, Issue 11
Abstract
The demand of river sand in the construction industry has consequently increased due to Urbanization and mass construction of housing resulting in the reduction of natural sources and also an increase in price. In such a situation crusher dust or robo sand can be an economical alternative to the river sand. Hence crusher dust was used as replacement of fine aggregate with a dosage of 10%, 20%, 30%, 40% and 50%. In order to reduce the cost of concrete the usage of pozzolan in place of cement is also proposed to use. Blast Furnace Slag is a non-metallic product consisting essentially of Silicates and Alumino silicates of calcium's developed simultaneously with iron in a blast furnace and is granulated by quenching the molten material in water or steam, and air. The present Investigation has been undertaken to study the effect of blast furnace slag and crusher dust on the mechanical properties of concrete, when coarse aggregates is replaced by blast furnace slag and fine aggregate with crusher dust in different percentages i.e. 0%, 10%, 20%, 30%, 40% and 50%. The main parameters investigated were cube compressive strength, split tensile strength and flexural strength. The tests were conducted on concrete with ratio 1:1.86:3.77.
Authors and Affiliations
Srinivasa Rao R, Kishore Kumar M, Vikranth J
slugTechnology Trends in Banking Operations
A strong, healthy and sustainable banking system is very essential for the overall development of an economy and failure of which may lead to collapse of the economy as a whole. The banking scenario in the country in th...
slugAn Efficient Objects Discrimination and Noise Reduction on Hyperspectral Images
Hyperspectral imaging (HSI) combines conventional imaging and spectroscopy to attain both spatial and spectral information from an object. But the main drawback in HSI is inheritance of noise while their acquisition or...
Load Profile Analysis of Electricity Customer Using Adaline Based Clustering Algorithm
This paper deals with the classification of electricity customers on the basis of their electrical behavior. Client classification may also be used for an integrated planning system, by considering the load-management a...
slugFabrication of WS 2 Nanostructures Using Vapor Phase Deposition Method
Direct growth of atomically thin WS2 nanoplates and nanofilms on the SiO2/Si (300 nm) substrate by vapor phase deposition method without any catalyst is presented here. The WS2nanostructures were systematically characte...
slugA Survey On Cognitive Radio
Cognitive radio (CR) has emerged as a promising technology to exploit the unused portions of spectrum in an opportunistic manner. The fixed spectrum allocation of governmental agencies results in unused portions of spec...