Structural Considerations on Fatigue Cracks
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2015, Vol 22, Issue 1
Abstract
This paper has been focused on the modern theoretical and experimental investigations on fatigue of metals which are now largely concentrated on three important areas: fatigue crack nucleation, short crack growth and long crack propagation. The main differences concerning the short cracks and long cracks mechanical investigation analysis have been presented.
Authors and Affiliations
Cornel Bit
Keywords
Related Articles
- EP ID EP448795
- DOI -
- Views 63
- Downloads 0
System for Monitoring and Analysis of Vibrations at Electric Motors
The monitoring of vibration occurring at the electric motors is of para-mount importance to ensure their optimal functioning. This paper presents a monitoring system of vibrations occurring at two different types of elec...
Contributions to Design of Actuators functioning with Nitinol Active Springs
The paper presents the research results achieved in order to perform a comparison regarding the influence of natural and forced cooling proc-ess applied to the Nitinol active springs inside a linear motion actuator. SMAs...
The Hermetic Synchronous Engines for Pumping the Aggressive Liquids
The paper covers brief information about asynchronous and synchronous engines used for driving centrifugal pumps. It is argued the fact that asynchronous engines do not, actually, satisfy the requirements for hermetic en...
Numerical Modeling of Transient Heat Transfer in Longitudinal Fin
The main objective of the present numerical study is to investigate the transient heat transfer in one kind of all-purpose longitudinal fin with the triangular profile. The lateral surface of the concerned fin and the ti...
Tests Performed on Hydraulic Turbines at Commissioning or after Capital Repairs. Part I. Tests Per-formed on a 78-MW Francis Turbine
The paper presents the tests recommended by the standards to be per-formed on a hydraulic turbine on commissioning, after repair works or refurbishment, and the manner in which these tests were executed in a hydro power...