Structural Optimization of Different Truss Members Using Finite Element Analysis for Minimum Weight
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
This paper aims to optimize and analyze a Warren, Pratt and Howe steel trusses and comparing Warren truss with other Pratt and Howe trusses. Existing structure steel trusses was initially optimized for minimum weight, in constrained with allowable stresses and deflections. The cross-sectional area of the truss members is taken as a design variable. Existing geometry and loading conditions of the truss are sized to mimic a real world environment. Every attempt was made to adhere to both state and federal regulations. The structural steel trusses was optimized using the design optimization tool as first order optimization method in ANSYS and it is extended to compare for best suitable truss geometry for minimum weight. Mesh studies were performed on all ANSYS finite element models to ensure solution convergence. A comparison of the trusses was made by evaluating the minimum margin of safety in all truss members. To make a fair evaluation all trusses have identical geometries and loading conditions. The intent is to compare which truss is more efficient when constructing a truss. Finally it is concluded that Warren truss is showing high stiffness to weight ratio over other trusses after optimization.
Authors and Affiliations
P. Satheesh Kumar Reddy, Ch. Nagaraju
Keywords
Related Articles
- EP ID EP653365
- DOI 10.24247/ijmperdaug201911
- Views 116
- Downloads 0
MECHANICAL PROPERTIES OF GLASS/BAMBOO FIBERS REINFORCED EPOXY COMPOSITES COMPARING WITH CHOPPED STRAND MAT TREATED WITH BACTERIAL CELLULOSE
Fiber-reinforced epoxy composites have played a principal role for a lengthy time of applications for their strength, cost-effectiveness, lightweight, and degradability. An innovative method of manufacturing rigid and ro...
Design of Pressure Vessel for Improvement of a System in a Process Unit
Vessels that carry, store, or get hold of fluids are known as pressure vessels. A pressure vessel is a containerwith a pressure differential between internal and outside. In the present paper, it has been discussed regar...
Investigation of Microstructural and Metallurgical Properties of Corten A588 Grade Steel GTAW Joint
Corten A588 steel is a high strength low alloy structural steel having 0.19% wt of carbon content. It has good corrosion resistance when exposed to extreme atmospheric conditions. Corten steel weighs less than other grad...
The Experimental Studies of Heat Transfer and Friction Factor in a Roughened Solar Air Heater using Arc Rib Geometries
Solar air heater utilizes rib roughness to enhance heat transfer. Experimental investigation has been conducted to study heat transfer and efficiency improvement in solar air heater using the arc rib roughness. Rib rough...
Evaluation of CI Engine Performance and Emission Fuelled by Diesel-Mosambi Peel Pyro Oil Blended with Copper Oxide Nanoparticles
The day by day increase in the emission of pollutants into the environment coming from road transport and rail way transports, and depletion of natural resources and economic considerations are the main reasons for the d...