Structure and properties of Ni22Cr10Al1Y coatings deposited by the vacuum plasma spray process
Journal Title: Vojnotehnički glasnik - Year 2017, Vol 65, Issue 2
Abstract
In this study, the aim was to deposit layers of the Ni22Cr10Al1Y coating using the vacuum plasma spray process to protect gas turbine engine components from oxidation and high-temperature corrosion. The coating can significantly affect the properties of the substrate because it forms a composite together with the substrate. The type of the coating deposition process and coating heat treatment, together with the substrate, significantly affect its resistance to high temperature creep. Ni22Cr10Al1Y powder was deposited with a vacuum plasma spray system of the Plasma Technik - AG company using the control panel A-2000 and the plasma gun F4. The coating deposited on the substrate of INCONEL X-750 alloy was thermally treated at 1100oC for 2 hours in a protective atmosphere of argon. The particle morphology was tested by scanning electron microscopy. The microhardness of layers was tested by the HV0.3 method and the bond strength was tensile tested, in accordance with the standard Pratt & Whitney. The microstructure of the deposited coating layers was examined under a light microscope. Coating etching was done by mixing 2.5ml of nitric acid HNO3 with 7.5ml of hydrofluoric acid HF. The microstructure of the etched coating before and after heat treatment, as well as the thickness of the diffusion zone, were analysed under a light microscope, based on which the coating quality was later assessed.
Authors and Affiliations
Mihailo Mrdak
Keywords
Related Articles
- EP ID EP300318
- DOI 10.5937/vojtehg65-11904
- Views 111
- Downloads 0
Designing priority databases for QMS according to ISO 9001: 2015 standard
The international ISO 9001:2015 standard for quality management system (QMS) is widely implemented in this country, especially in business organisations and in public administration. The Standard was created in 1987; it...
Modern weapons and military equipment for issue 1-2018
Equipment for the emergency response of the Serbian Armed Forces. Configuration of equipment for the needs of special operations.
Publication ethics statement for issue 1-2018
The publication of an article in this peer reviewed journal is an essential model for the scientific journal Military Technical Courier. It is necessary to agree upon standards of expected ethical behavior for all partie...
Characteristics of polyurethane and elastomer parts for shoe industry produced by liquid injection molding technology
This paper presents the characteristics of the materials used in footwear industry, with a particular emphasis on polyurethane materials for making soles. The role, purpose and design of soles are also discussed, as well...
Kinetics of the non-isothermal desorption of ethanol absorbed onto CMS-3A
The kinetics of the desorption of ethanol previously absorbed onto carbon molecular sieves (CMS-3A) was studied using the non-isothermal thermogravimetric technique. The dependence of activation energy (Ea,α) for a parti...