Studies and Research on Water Pollution in Galati Urban Area
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 2
Abstract
The purpose of the work was the study of wastewater treatment at the Galati sewage Station in June, August 2017 and January, February, April and May 2018. The treatability can be expressed by removing the total organic substances from water (determined by CCO or cot tests) or by removing equivalent substances (determined by the CBO test). The reduction of CCOCr and CBO5 from wastewater after passing through the installation of the Galati treatment station is an estimate of the quantity of organic substances removed in the treatment process. As a result of the determination of the concentration of organic substances in the influence and effluent of the Galati treatment station, the following were found: The Symons environmental treatment ratio achieved for influence was 0.554 which framed the influence in S.E. Galati in the category of wastewater readily treatable by biological methods, in the presence of naturally occurring micro-rganisms in these waters. Another criterion for assessing the treatability of wastewater is the efficiency of reducing CCOCr and CBO5. The efficiency of reduction of CCOCr (81%) and CBO5 (84%) allow for the characterization of wastewater as a biological treat in S.E. Galati and alongside the operation at optimum parameters of treatment plants.
Authors and Affiliations
Stela CONSTANTINESCU
Keywords
Related Articles
- EP ID EP597748
- DOI -
- Views 53
- Downloads 0
Electrodeposition and Characterization of Ni-Si Nanocomposite Coatings
In this paper is presented morphological aspects and corrosion behaviour of composite coatings having nickel as metal matrix and silicon as dispersed phase obtained during electrodeposition process of nickel. Silicon mea...
Ni-P Coating on Steel Support by Electroless Method
The autocatalytic reduction method (electroless method) was applied to obtain the Ni-P layers with different P contents. Nickel sulfate was used as nickel ion source and as reducing agent the sodium hypophosphite. The su...
Improvement of Steel Sheet Corrosion Resistance by Thermic Coverage Method with ZincAluminium Alloys
The paper presents the main physico-chemical characteristics (viscosity and superficial tension of zinc-aluminium liquid alloy in view of carry out protected layers on steel sheet with very good properties by thermal met...
Influence of Steel Modification Allied with 4-7%Si on Macrostructure
The goal of this paper is to test the effect of odification process of liquid steel with 4-7% silicon content, in the course of pouring out from steel-smelting furnace into ladlet, on macrostructure. The research settle...
Study on the Use of Oxygen-Enriched Combustion Air at the Ignition Initiator Furnace from the Agglomeration Machine
Comparative study on the use of oxygen-enriched combustion air at the homogenization coal ignition coil from Dwight-Lloyd agglomeration No 5 from the ArcelorMittal Galati metallurgic plant to reduce fuel consumption, inc...