Studies on Textile Industry Waste Water Using Saw Dust as a Low Cost Adsorbent

Journal Title: Universal Journal of Environmental Research and Technology - Year 2013, Vol 3, Issue 6

Abstract

The textile wastewater contains different colors which are harmful to the environment. The removal of dyes from effluent using adsorption process provides an attractive alternative treatment, especially if the adsorbant is inexpensive and readily available. In this present research paper natural adsorbant saw dust was used for removal of color from waste effluent of textile industry. The adsorbant prepared was employed for the removal of color at the different doses. The adsorbant was found to be capable of removing color from wastewater; the color removal capacity for saw dust was approximately 70% at normal pH and temperature. From the experimental investigations, the maximum color removal from the textile industry wastewater was obtained at an optimum adsorbant dosage of 12.5g/l of wastewater, with an optimum contact time of 24 hours, at room temperature. This result was higher than the results obtained by different process parameters for various adsorbants. It is found that the transmittance was found to be 67% with an absorbance of 0.16, BOD too was reduced from 400mg/l to 300mg/l. also owing to the adsorption process several other parameter such as chloride, sulfate, iron, COD was also reduced considerably.

Authors and Affiliations

S. Vijayakumar, C. Arunprakash, V. Sivakumar, M. sangeetha, T. Narmatha, M. Nishanth, R. Gobinath

Keywords

Related Articles

Signature of Variation of Total Ozone Column during Tropical Cyclone, Aila 2009 over the Bay of Bengal and the Land of West Bengal

The paper presents the variation of the total ozone column (TOC) over Bay of Bengal and the land of West Bengal, India before, during and after the tropical cyclone, Aila that occurred in the month of May 2009. Total o...

Microbial Sulfur Oxidation Effect on Micronutrients Availability of Municipal Compost for Wheat Plant

Dual application of municipal compost and elemental sulfur may reduce soil pH and increase phosphorous and some micronutrients availability in soil. This study was aimed to investigate the impact of supplemented compos...

Evaluation of Interpolation Technique for Air Quality Parameters in Port Blair, India

Evaluation of interpolation technique was investigated for air quality parameters such as suspended particulate matter (SPM), sulphur dioxide (SO2) and nitrogen dioxide (NO2) in ambient air of Port Blair, India. The in...

A Study of Sustainable Tourist Centers in Parner Tahsil: A Geographical Analysis

Tourism is one of the largest and fastest growing industries. It is also one of the largest employing labor forces. Tourism industry has major role in development process. Nowadays, India is having greater scope in tou...

Analysis of Mining Operations in the Forest Demarcated as No Go Zones

Forest area in our country is classified into Go Zones and No Go Zones based on their crown density. No Go Zones are dense forest areas where mining operations cannot be permitted. However, for extraction of coal lying...

Download PDF file
  • EP ID EP31868
  • DOI -
  • Views 319
  • Downloads 1

How To Cite

S. Vijayakumar, C. Arunprakash, V. Sivakumar, M. sangeetha, T. Narmatha, M. Nishanth, R. Gobinath (2013). Studies on Textile Industry Waste Water Using Saw Dust as a Low Cost Adsorbent. Universal Journal of Environmental Research and Technology, 3(6), -. https://europub.co.uk/articles/-A-31868