Studies Regarding the Influence of Boron Addition on the Hardness and Friction Coefficient of the Mn, Mo and Cr Ecological Alloyed Sintered Steels
Journal Title: RECENT - Year 2011, Vol 12, Issue 33
Abstract
In this paper are presented the experimental results regarding the elaboration of the Fe-Mn-Mo-Cr-B-Graphite and Fe-Mn-Mo-Cr-Graphite ecological alloyed sintered steels. There have been produced mixes containing 3% Mn, 1%Mo, 1.5%Cr, 0.5%B, 0.45Grafit and Fe which were exposed to the process of Mechanical Alloying (MA) for 20, 40, and 60 hours. The mixtures were pressed in a cylindrical die at three pressures (600,700 and 800 MPa), after that the green densities were calculated. The compacts were sintered in a furnace with protective atmosphere (Ar) at different temperatures (1050, 1100 and 1150 °C) and the dwell time was 120 minutes. The samples obtained after sintering treatment were investigated by optical and electronic microscopy. The mechanical properties such as hardness and friction coefficient were studied too. It is observed that high values of hardness (HV0.2) and friction coefficient μ = 0.158 were obtained for the Fe-Mn-Mo-Cr-B-Graphite ecological steels obtained after 60 h of mechanically alloying, pressed at 800 MPa and sintered at 1150 [sup]o[/sup]C.
Authors and Affiliations
Ionela BUCŞE, Adela IONESCU, Claudiu NICOLICESCU, Jeni GHERCIOIU
Keywords
Related Articles
- EP ID EP86056
- DOI -
- Views 104
- Downloads 0
Efficient Management in Enterprises by Sustainable Development of Competences
The topic addresses the need to implement the concept of sustainable development businesses in Romania, Austria, and Germany. The article examines the adaptation and customization of software created by the author assess...
General Mathematical Model for Type-Dimensional Synthesis of Function-Generating Mechanisms with Four-Bar Topological Structure
The present work is devoted to the developing of a general mathematical model for type-dimensional synthesis of function-generating mechanisms with four-bar topological structure and rotation of the input and the output....
Corrosion Test of the Siliconized and Chromo-Siliconized Steels
The paper presents the results of the comparative study of the corrosion tests to the siliconized and chromo-siliconized steels. The thermo-chemical treatments were made in powder mediums. The corrosion tests were made i...
Multicriterial Optimization Applied for Choosing the Measuring Instrument
According to David C. Crosby, "If you don’t know the capability of your measurement system, you don’t know if your measurements, or your products, are good or bad". Starting from this basic it had been made an comparativ...
Insolvency - Solution for the Activity Continuation of the Companies Seriously Affected by the Crisis
The economic crisis began to render itself visible in the number of companies having entered under the incidence of the law concerning insolvency. The financial blockage and the impossibility of paying one’s obligations...