Study into the structuralphase transformations accompanying the resourcesaving technology of metallurgical waste processing
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 12
Abstract
<p>The paper reports a study into the physical-chemical properties of a doped alloy obtained from reduction smelting. That was necessary to identify the parameters that reduce the loss of Ni and Cr when processing oxide alloyed raw materials and utilizing the doping additive received. It was determined that the alloy at Si:C in the charge 0.14–0.50 (O:C=1.78) contains the following phases: a solid solution of C and the alloying elements in γ-Fe and Fe<sub>3</sub>Si. At Si:C=0.14, it is dominated by a solid solution of C and the alloying elements in γ-Fe with a weakly manifested Fe<sub>3</sub>Si. A stepwise change of Si:C in the charge to 0.26, 0.38, and 0.50 led to the increased manifestation of Fe<sub>3</sub>Si. The alloy's microstructure at different Si:C in the charge clearly manifested several phases, with a different content of the basic alloying elements. The content of Ni is 2.97–14.10 % by weight, that of Cr is 0.91‒17.91 % by weight. An increase in Si:C in the charge from 0.14 to 0.50 led to an increase in the content of Si from 0.04 % by weight to 0.55 % by weight. Values for carbon in the examined local areas at the surface of the alloy exposed to X-ray microanalysis ranged from 0.51 to 1.48 % by weight. Local areas of the microstructure with increased Mo (to 9.10 % by weight), Si, and C indicate a possibility of the presence of Mo in the form of silicides or carbosilicides. It follows from the results obtained in the course of our study that the most acceptable Si:C in the charge is 0.26 (at O:C=1.78). In this case, reduction is ensured with a predominance in the phase composition of the solid solution of C and alloying elements in γ-Fe and the manifestation of residual Si in the form of silicides. In other words, we have determined indicators for obtaining an alloy with a relatively low content of Si and C, which is sufficient to provide the required reducing and oxidizing capability of the alloy. This expands the possibilities for resource saving when using the resulting alloy with the replacement of certain part of standard alloying materials when smelting steel brands limited for carbon and silicon.</p>
Authors and Affiliations
Artem Petryshchev, Nikolay Braginec, Viacheslav Borysov, Oleksii Torubara, Bohdan Tsymbal, Svitlana Borysova, Anatolii Poliakov, Volodymyr Kuzmenko
Keywords
Related Articles
- EP ID EP667094
- DOI 10.15587/1729-4061.2019.175914
- Views 92
- Downloads 0
Analysis of statistical methods for stable combinations determination of keywords identification
<p class="a">The study has solved the task of making comparative analysis and choosing an optimal statistical method to determine stable word combinations while identifying keywords to process English-language and Ukrain...
Determining rational parameters of the capacitive energy storage system for the underground railway rolling stock
<p>An approach was proposed for determining rational parameters of the on-board capacitive energy storage for the underground railway rolling stock with recuperation systems. The essence of the approach is to determine t...
The objectified procedure and a technology for assessing the state of complex noise speech information protection
<p>White noise generators are typically applied for the systems of active interference in the design of systems for protecting verbal information. The level of speech information protection against leaking through acoust...
Development of the formulation for extruded products based on sugar corn grain and determining their quality indicators
<p class="par-indent">The formulations of extruded products based on sweet corn grain, bare-grain barley, carrot root crops, and licorice root and collagen hydrolysate have been developed.</p><p class="par-indent">We det...
Research of the impact of the method of heating of heat units on the qualitative characteristics of treated materials
<p>An analytical method for calculating the chemical potentials of the components of the gas-solid system based on thermodynamic calculations of carbon potentials of the С–О–Н–N gas mixture (combustion products of the me...