STUDY OF COMPREHENSIVE CHEMICAL ADDITIVES, PROVIDING A PERMEABLE ACTION ON PHYSICAL AND MECHANICAL PROPERTIES REPAIR COMPOSITION BASED BINDER SHLAKOLUZHNOHO
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 171, Issue 5
Abstract
The article is devoted to the substantiation of the non-cement composition of penetrating action on the basis of blast furnace granulated slag and sodium silicate. The results of the investigation of the influence of the content of sodium hydroxide and the complex chemical additive that provides penetrating action on the physical and mechanical properties of the composition are given. Electronic-microscopic research was carried out. It was established that the dependence of the composition strength of the sodium hydroxide content has an extreme nature with a maximum corresponding to its content of about 5 %. Correlation between the strength of the composition for compression and the content of a complex chemical additive within 1-3 % was not revealed.. It has been found that the hydration products of the composition are preferably gel-like, crystalline hydration products presented in a smaller number of prismatic and needle-like crystals of aluminate phases. The pore size in the composition of the composition preferably does not exceed 2 µm
Authors and Affiliations
Andrii Plugin, Vitalii Lyuty, Ulia Savchuk
Keywords
Related Articles
- EP ID EP312337
- DOI 10.18664/1994-7852.171.2017.111394
- Views 45
- Downloads 0
INDUSTRIAL WASTE AS AN EFFECTIVE RAW MATERIAL FOR PRODUCING THE LOW-FIRED CERAMIC COMPOSITE
Due to depletion of high-quality natural raw material resources combined with build-up of reserves of man-made industrial products, waste disposal problem becomes a topical issue particularly in the industrial regions. O...
TO THE QUESTION ON IMPROVEMENT IN FREIGHT CAR AXLE-BOX
The article contains a comparison of operating costs to the time of repair of the axle unit of the freight car. The economic effect of replacing the domestic standard axle box unit with cylindrical bearings with a pedest...
RESISTANCE OF CONCRETES AT PERIODIC EXTERNAL INFLUENCES
The purpose of the work is to increase resistance of concrete in conditions of repeated freezing-thawing and wetting-drying. An important property of concrete is its ability to adapt to the periodical effect of external...
DEVELOPMENT OF RECYCLING TECHNOLOGY FOR RELAXED SURFACES OF MOBILE COMPONENTS
In the process of studying the ways of restoring the worn surfaces of cast-iron parts of the rolling stock, it is established that the known methods of recovery do not provide the required workability. It is proposed to...
INCREASE OF PROFITABILITY OF CENTER-SERVICE ON RAILWAY TRANSPORT
The article considers the issue of improving the service center of Lozova station. Analysis of the passenger traffic of Lozova station for 2017 and the current service center for various types of passengers. Increase the...