Study of functional performance improvements for cutting teeth mounted on bucket wheel excavators operating in Oltenia coal basin – Romania
Journal Title: Mining – Informatics, Automation and Electrical Engineering - Year 2018, Vol 535, Issue 3
Abstract
The values of the resultant forces acting on the cutting teeth of BWEs can either be calculated or determined using experimental methods. Based on this, the position and parameters of the working organs during the cutting process are designed and built. The stresses and deformations of the teeth during the cutting process are influenced by their positioning on the excavator bucket, which is determined by the fitting mode of the teeth. In this paper, the stresses and deformations in the case of an existing tooth holder are analysed and a new type of tooth holder is proposed, using SolidWorks® software for this analysis.
Authors and Affiliations
Florin Dumitru Popescu, Sorin Mihai Radu, Andrei Andraś
Keywords
Related Articles
- EP ID EP433761
- DOI 10.7494/miag.2018.3.535.7
- Views 121
- Downloads 0
About requirements for diesel drives used in hard coal mine underground workings
Due to the rapid increase of using transportation machines with diesel drives in hard coal mine underground workings, the technical and operational requirements for these drives are analyzed. The ambiguity of the Europea...
High-speed optical methane concentration meter with the dust compensation of mine atmosphere
We tested an optical-absorption methane concentration meter for coal mines conditions. We studied conversion characteristics and evaluated its speed performance and proposed a method of dusty coal mines air multiplicativ...
Investigation of correlation between physical properties and microstructure geometrical parameters of Cr-Cu composite material used for vacuum arcing contacts
A new microstructure quality index is proposed, suitable for Cr-Cu system metal-matrix materials used for arc-suppressing electrical contacts of vacuum switches for high voltages (10-36 кV) and high currents (20-100 кА)....
Main objectives underlying mathematical model of powered support unit operation in terms of its working capacity
This study synthesizes the operating data of a longwall system to determine the impacts of time, compressive strength of roof rock strata, rate of face advance, and distance between the cross bar in a roof support from t...
Breakdown of hoisting machine in mining shaft hoist installed in southern section of R-II shaft of KGHM Polska Miedź S.A. O/ZG Rudna
This article applies to a one-of-its-kind case of the cracking of the main shaft of a hoisting machine that occurred in the southern section of the R-II shaft of KGHM Polska Miedź S.A. Oddział ZG “Rudna” in 2011. The min...