Study of Heat Treatment Influence on Aluminum - Based Alloy ATN-Si10Cu4
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the variation of properties depending on the variation of heat treatment technological parameters specific to different heat treatment. We have experimented more variants of heat treatment in order to establish the optimal variant treatment. The samples were characterized by HB hardness and microstructure analysis.
Authors and Affiliations
Elisabeta VASILESCU, Simona BOICIUC
Keywords
Related Articles
- EP ID EP661046
- DOI -
- Views 71
- Downloads 0
Experimental Studies and Research During Heat Treatment on the Behaviour/Aging of Al-Zn Alloy System with Different Zn Content
The paper presents the results of a research on the behavior at artificial aging heat treatment carried out on three different chemical compositions of the alloys belonging to Al-Zn system. We studied the behavior of the...
Challenges in Corrosion Protection Using Vegetable Extracts as Inhibitors - Electrochemical Studies
Corrosion is an irreversible chemical or electrochemical reaction of a material with its surrounding environment or medium which results in consumption of the material or in dissolution into the material of a component o...
Determination of Friction Coefficient at Sliding Indentation of Laser Cladding with Ni – Cr – B – Fe – Al Alloy
To increase resistance to wear of the surface layers made from 0.45% C steel, a multilayer deposit by powder injection with the chemical composition Cr 8.9%, 4.5% Fe, 5.1% B, 2, 4% Al, 0.6% Cu, and Ni was tested in a mol...
The Influence of the Thermomagnetic Treatments on the Hardness Number of Steels and the Superficial Layers Nitrided Durability
Two types of steels subjected to a nitriding thermo-chemical treatment after thermomagnetic treatments. The structural aspects into superficial layer of these steels are studied during friction process by using of an Ams...
Transparent and Conducting Tin Oxide Thin Films Deposited by Spray Pyrolysis
The chemical spray pyrolysis technique has been one of the major techniques to deposit a wide variety of materials in thin film form, for different applications. The most important control parameters for obtaining good q...